Solid G problem...

[helnet]

Hi,

I just install the Solid G with Ace DS0606 Servo (.06ms 5.3kg @ 6v). I did all the setup. Everything is working except when I do a fast movement with the stick left and right (bang bang), the servo does not move (no response)If I do a slow movement the servo move.

I check with another brand of servo and it's samething. I change my battery and samething.

Do you have any advice about his problem?

Thank you!

[wacojoe]

Does it do it when you are fly? or only when bench testing. Mine is like that on the bench, but when flying OMG its fast and works great. Hope this helps.

[helnet]

Thanks you for your fast reply,

I found in the manual that is normal when is on the bench.

Very fast!
Yes sir.

[johnkorm]

do you step down your voltage to 5.1 or can you run it all on 6?

[helnet]

do you step down your voltage to 5.1 or can you run it all on 6?

I step down to 5v.

[johnkorm]

do you think its mandatory

[helnet]

do you think its mandatory

IT's not mandatory. The specs from Curtis Gyro Solid G is:

The Solid G is rated up to 7V. This voltage limit is higher than any tail servo on the market. Most tail servos have a max limit of 5.7V (some as high as 6V)

The specs of Ace are:

The max voltage of the DS0606 is 6v.

[johnkorm]

who is willing to try?i am looking for a gyro package for my new aurora and am cougt between futaba 611 and solid g..i like the idea of not having to step down below 6v but who knows