Splix
05-17-2008, 11:47 AM
SOLD so dont bug me :D :banana
(I do have RunRyder positive feedback if you need to check up on me)
Here it is, my Blade 400. I hate to do this, but you goda do what you goda do. The reason I'm selling this is because I just never fly it anymore, and I need to fund the 50 size project. I have another 450 that I usually fly.
I'm not going to try and lie and say things like "this has only been flown 3 times" nonsense. I flew the crap out of this heli. It has been crashed, I've learned on this heli, It was my starter. But it is a heli, not a plane. When you crash, you replace parts with brand new ones, so its the way it should be. I fly with Corben Myers from team MA, so its not like this heli was put back together by a complete noob. He has rebuilt it 95% of the time for me, while teaching me. Right now the heli is absolutely perfect. It has had probably around 10 flights since its last rebuild a month ago or so. Its setup to be a nice super stable heli. It is capable of complete 3D, but right now it was planned out to be a scale flyer for me. It defiantly flies more stable than my trex 450se v2, but just not the 3D ability the way its setup right now.
The biggest complaint people had about this heli out of the box were the servos and the tail. I took care of both of those issues. All new servos, CF tail fin to let the air flow through it and the larger carbon tail blades with the new servo. It fly's so much better than out of the box.
I'd like to get $300 plus paypal fees.. Possible trades if they're what I'm looking for. Trex 450se v2 parts accepted.
Here's the list of what all is included:
(I'd like to keep my rx if possible, but if you HAVE to have it, they're cheap enough, I guess I can include it.)
Eflight Blade 400
Align 335 blades
Align carbon look flybar paddles
Eflight 420 motor
Blue heatsink Eflight ESC
Eflight heading lock digial gyro
AR6100 spectrum rx
Silver carbon fiber stabilizer fin and tail fin set
Align Trex 450 carbon tail blades
(3)HS-56hb servos on cyclic
Futaba 3114 servo on tail
Carbon tail linkage
Align Fiberglass canopy
Boom mounted tail servo
relocated gyro
Flybar weights
Align 22c 2100mAh battery (10-15 cycles, 0% puff. I baby my batteries) I only draw around 1000mAh out of them each flight.
3 extra DS75H servos (new)
2 extra ds75 gear sets
1 extra HS-56hb servo (new)
1 extra hs-56hb servo (needs gear set berring, but its good electronically)
3 extra sets of hs-56hb carbonite gear sets
extra boom
extra tail fin
3 extra blade grips
2 extra flybars
2 extra main shafts
4 extra feathering shafts
extra servo boom mount
2 extra tail linkage rods
extra landing gear
trex 450 bump resistant landing gear (blue metalic)
Battery and ESC connections were converted to Deans ultra's.
Pictures:
http://i183.photobucket.com/albums/x271/majastic/CIMG0693.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0692.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0691.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0690.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0689.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0684.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0683.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0682.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0681.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0680.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0678.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0673.jpg
(I do have RunRyder positive feedback if you need to check up on me)
Here it is, my Blade 400. I hate to do this, but you goda do what you goda do. The reason I'm selling this is because I just never fly it anymore, and I need to fund the 50 size project. I have another 450 that I usually fly.
I'm not going to try and lie and say things like "this has only been flown 3 times" nonsense. I flew the crap out of this heli. It has been crashed, I've learned on this heli, It was my starter. But it is a heli, not a plane. When you crash, you replace parts with brand new ones, so its the way it should be. I fly with Corben Myers from team MA, so its not like this heli was put back together by a complete noob. He has rebuilt it 95% of the time for me, while teaching me. Right now the heli is absolutely perfect. It has had probably around 10 flights since its last rebuild a month ago or so. Its setup to be a nice super stable heli. It is capable of complete 3D, but right now it was planned out to be a scale flyer for me. It defiantly flies more stable than my trex 450se v2, but just not the 3D ability the way its setup right now.
The biggest complaint people had about this heli out of the box were the servos and the tail. I took care of both of those issues. All new servos, CF tail fin to let the air flow through it and the larger carbon tail blades with the new servo. It fly's so much better than out of the box.
I'd like to get $300 plus paypal fees.. Possible trades if they're what I'm looking for. Trex 450se v2 parts accepted.
Here's the list of what all is included:
(I'd like to keep my rx if possible, but if you HAVE to have it, they're cheap enough, I guess I can include it.)
Eflight Blade 400
Align 335 blades
Align carbon look flybar paddles
Eflight 420 motor
Blue heatsink Eflight ESC
Eflight heading lock digial gyro
AR6100 spectrum rx
Silver carbon fiber stabilizer fin and tail fin set
Align Trex 450 carbon tail blades
(3)HS-56hb servos on cyclic
Futaba 3114 servo on tail
Carbon tail linkage
Align Fiberglass canopy
Boom mounted tail servo
relocated gyro
Flybar weights
Align 22c 2100mAh battery (10-15 cycles, 0% puff. I baby my batteries) I only draw around 1000mAh out of them each flight.
3 extra DS75H servos (new)
2 extra ds75 gear sets
1 extra HS-56hb servo (new)
1 extra hs-56hb servo (needs gear set berring, but its good electronically)
3 extra sets of hs-56hb carbonite gear sets
extra boom
extra tail fin
3 extra blade grips
2 extra flybars
2 extra main shafts
4 extra feathering shafts
extra servo boom mount
2 extra tail linkage rods
extra landing gear
trex 450 bump resistant landing gear (blue metalic)
Battery and ESC connections were converted to Deans ultra's.
Pictures:
http://i183.photobucket.com/albums/x271/majastic/CIMG0693.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0692.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0691.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0690.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0689.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0684.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0683.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0682.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0681.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0680.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0678.jpg
http://i183.photobucket.com/albums/x271/majastic/CIMG0673.jpg