Neil_J
05-18-2008, 04:10 PM
Up for sale, one box of T-Rex 600E parts. I crashed my 600 pretty bad back in December, it was such a bad crash it would have been cheaper to buy a new frame rather than buy the individual parts. :dontknow :arggg: I offer here the "remaining" uncrashed parts below to someone with a 600E that may be able to use them:
Align 600XL motor, ESC, and 10T pinion
3x Align Futaba servo wheels (for correct geometry on elevator, aileron, and pitch servos)
Complete head with exception of main shaft, flybar, 1x SF mixing arm, 2x flybar control rods, and a ball link or two.
Complete tail rotor housing, with tail rotor shaft, tail grips, control arm, pitch assembly, etc
Vertical fin, horizontal fin
Tail boom case w/tail drive gear assembly
tail belt
One-way bearing
Tail drive gear
Frame pillow blocks
Battery tray, gyro mount, aluminum motor mount
Anti-rotation bracket, canopy mounts
Rudder servo mount, rudder servo bracket
Tail control guides, 2x
Tail boom brace, 2x
Bag of all hardware from frame
$100+actual S&H takes everything here, that's a pretty good deal if you look at the individual prices.
http://www.helifreak.com/attachment.php?attachmentid=48435&d=1211141322
What's NOT included:
Canopy
Main blades or tail blades, flybar, or paddles
Side frames
Boom
Main drive gear
Landing gear or skid pipes
Any electronics not listed above (I do have 3x Futaba 9452's available seperately however, PM me if interested)
PM me if interested. Paypal only please, I will ship anywhere in the U.S 50 states, or Canada.
Align 600XL motor, ESC, and 10T pinion
3x Align Futaba servo wheels (for correct geometry on elevator, aileron, and pitch servos)
Complete head with exception of main shaft, flybar, 1x SF mixing arm, 2x flybar control rods, and a ball link or two.
Complete tail rotor housing, with tail rotor shaft, tail grips, control arm, pitch assembly, etc
Vertical fin, horizontal fin
Tail boom case w/tail drive gear assembly
tail belt
One-way bearing
Tail drive gear
Frame pillow blocks
Battery tray, gyro mount, aluminum motor mount
Anti-rotation bracket, canopy mounts
Rudder servo mount, rudder servo bracket
Tail control guides, 2x
Tail boom brace, 2x
Bag of all hardware from frame
$100+actual S&H takes everything here, that's a pretty good deal if you look at the individual prices.
http://www.helifreak.com/attachment.php?attachmentid=48435&d=1211141322
What's NOT included:
Canopy
Main blades or tail blades, flybar, or paddles
Side frames
Boom
Main drive gear
Landing gear or skid pipes
Any electronics not listed above (I do have 3x Futaba 9452's available seperately however, PM me if interested)
PM me if interested. Paypal only please, I will ship anywhere in the U.S 50 states, or Canada.