CONNECTION CONFIG FOR SPEED CONTROL ALIGN 100???? URGENT THANKS

[kuryaky]

How i have to connect?
I need bec?
how i power up the receiver and the servos?
I need additional bec and 7.4 lipo battery?

I really dont understand how connection schema works when you have Align 100A Brushless ESC(Governer Mode) RCE-BL100G THE ENGINE CONNECT TO IT, and the ESC connect to channel 3 on receiver.

but how i power the receiver and the servos the ESC say it has not BEC.... i have extra BEC?, i need battery for it? how it works....

PLEASE SHOW ME THE LIGHT.

Thanks

[LITHIUMSTATIC]

If the Align doesn't have a BEC built into it you will need a separate BEC like the Western Robotics Hercules High Current.

You solder it to the leads coming from the main connector on your ESC. Not a separate battery pack but your main battery pack be it 6s or 10s or whatever your running. The BEC will drop the voltage from 22.2 or 37 volts down to 5 or 6 volts for your radio equipment.

[kuryaky]

External BEC(including 5.1V Step-Down Voltage Regulator) RCE-B3X

This Bec Work It out?
And if understand i have have to connect the ESC to BEC and this to receiver channel 3 THROTTLE channel?

thanks very much.

[lotus7]

Look at the Finless how to videos - BEC101
Thats what we did

[kuryaky]

everything was clear to me with this video.
THANKS VERY MUCH