Mini Titan and Futaba 2.4

[Kinger]

Anyone out there have a good picture of their mini titan and the wires from a Futaba 2.4 receiver? I plan to put my 7 channel receiver on the side where the manual indicates it should go and the spartan gyro will go in between the frames.

[jpheli]

file:///Users/jpkh/Documents/Hobby/oma%20titan%20pics/MT-left-rx.jpgHere is my pics what I just took from my MT. Hope they help you.

I have 401 on top of tail boom like in so many other installations, tho been thinking to move it between frames too. Let's see, i just want to see that led a bit ;)

--jp

[Kinger]

Thanks for the pics JP. Still having trouble making out where you actually ended up routing the antenna wires for the 617 receiver though.

[jpheli]

Aaah that.. well ok now I have x-gear spiders so it changed a bit with original skid, one antenna was following skid leg and other that tail support pipe. I did use normal clear tape to mount them :)

Now with spider x-gear, one antenna is still at support pipe and one is under belly.

If you look closely that pic, you should see those gray wires going to two different directions, other goes to support pipe and other goes inside that yellow plastic pipe. It's good to have them 90deg angle. Ok well it would be even better if one of them can point down that 90deg. So let's see how this setup will work for me.

With original skid it's easier. it's a plastic leg so just tape it to that leg :)

--jp

[Jethbroh]

i love your skids, what kind are they :clappp

[ghtracey]

They are X-Gear http://www.xgearheli.com/minititan.htm

[Crizz]

See the little white tube thru the frame at the rear landing gear mount ? There I put one thur, the other one you can see on the other picture on top of the Rx placed in another little tube. Works great.

[Kinger]

Thanks all. I got mine squared away. One tube is going down the tail boom support and the other is going down the landing gear. Gotta love scotch tape :)