View Full Version : Reflex Sim too slow to restart after a crash
beds_148
05-21-2008, 12:06 PM
Guys...
can you help me with this...My sim is way too slow to restart after a crash...What can you suggest to fasten it up...
heli-junkie-jp
05-22-2008, 05:08 AM
????
What are the specs on your computer?
helinovice
05-22-2008, 08:48 PM
make sure u have the correct resolution for your screen, UN-TICK the box for collision detection, and UN-TICK V-Sync and it should work fine, if it dont, then u may need better graphics card
Turn your receiver off and on and it will reset immediately. There is also a menu somewhere where you specify the seconds of delay. -Migs
beds_148
05-24-2008, 12:22 AM
thanks for all the inputs guys.... it helps a lot
J-Heli
05-24-2008, 04:51 AM
make sure u have the correct resolution for your screen, UN-TICK the box for collision detection, and UN-TICK V-Sync and it should work fine, if it dont, then u may need better graphics card
I had the same problem so I un-ticked the collision detection box, the V-Sync box, and corrected the resolution. It's much better thanks. One other thing, how do I un-zip a file such as a downloaded model or flying field? I've tried right-clicking on the downloaded file, but I get no extract or un-zip option. Thanks again.
catfight
05-24-2008, 10:58 AM
heli-cuzz,
What is the suffix extension name of the file? If it is not .zip then you may need another unzip type program. Some even come as .7 files and you can use this unzip program http://www.7-zip.org/.
J-Heli
05-24-2008, 11:05 AM
The file extension is .zip. How would you do it with the file extension being .zip. I'm pretty stuck. Thanks again.
catfight
05-24-2008, 12:39 PM
heli-cuzz,
Look around on your PC programs and see if you have an unzip program installed - then do it thru the program. Maybe redownload the zip file - possibly corrupt? Or send me the link and let me try it.
J-Heli
05-24-2008, 12:50 PM
I'll look around, but in the mean time I'm downloading the 7-zip program and I'm gonna try that. I've just been using www.rc-sim.de and the Reflex website. Thanks for your help.
J-Heli
05-24-2008, 01:16 PM
I downloaded the 7-zip program, and it worked! I extracted the files, and then copied them into the heli folder, and I was able to use them! Thanks!! :noteworthy :cheers
beds_148
05-25-2008, 08:48 AM
when I tried to run the downloaded helis, I could not make them run because it shows data appearance error.how can I make them run..please help.
J-Heli
05-25-2008, 09:46 AM
First you have to extract or unzip the file, and copy the file folder into the heli folder under reflex. If you just downloaded the model, then it's just trying to get you to tell it where to look for the model appearance file. Go to model, modify model params, and select the model appearance from the dropdown menu.