Remote glow driver mounting plate for 600N

[Espeefan]

Hi guys, I am looking for a part number on the remote glow driver plate/mount, which bolts to the side of the 600N frames, using the same hole as an engine mount. This mounting plate does not come with the Super Pro kit, as I found out. Rather then run an Align 2 in 1, I'd rather run a remote glow driver. Can someone please provide me with a part number, even if it includes more items in a bag? Thank you.

[aussiemick]

The parts list calls it 50NB032 Glow plug plate.

But, there is no reference to it using google.

Mick

[tmore13]

I need one also.
I'm also having a problem finding one. My Pro did not come with one, it should have had it in the engine mount bag. Every listing for engine mounts does not seem to include it.

[TheBum]

I didn't install mine and I suspect there are a lot of other people using 2-in-1s that didn't install it either. I'm not sure where I put it, but if I can find it and if anyone is interested, PM me and I'll ship it to you for the cost of postage.

Alternately, if you had a sheet of aluminum, you could easily make one.

[DavZee]

I need one also.
I'm also having a problem finding one. My Pro did not come with one, it should have had it in the engine mount bag. Every listing for engine mounts does not seem to include it.

My SP came with one. You can have mine. I'm using the 2 in 1 and it's working great.

[erniefritz]

I have one that came with my pro kit . i don't need it , i have Switchglow , so if someone wants mine , shoot me a PM with your address and i'll tape to a letter and mail it to you...

[TheBum]

BTW, mine's already spoken for, assuming I can find it amongst the mess that is my work table.

[fiveoboy01]

You don't really need that plate.... the remote glow will come with a bracket which you can bolt on using one of the engine mount screws... I'll snap a pic in a few.

[Espeefan]

Bill, Alan, and everyone else, thank you for the replies. Guess what? I found the remote glow driver bracket. The Super Pro does come with one. I just lost track of it. I found it tonight, hiding with some screws I had on my work table, that I guess I had pushed off to the side for later use. I'm a happy camper! I'm guessing anyone missing this bracket, probably just misplaced it. Thanks for the generous offers, but I wouldn't be needing one now! :D

[fiveoboy01]

Glad you found it becuase I forgot all about posting the pic:D

[squibcakes]

Just a small tip, I found that the plate didn't make a good electrical contact with the engine block through the screw, hence couldn't start engine... I suspose the painted screw and loctite didn't help.

In the end I used a bit of aluminium can cut and folded around the frame to make the contact between the plate and engine mount block....

[fiveoboy01]

Same here... It was just the black coating on the screw. I put it in a wire wheel and cleaned off the threads and the bottom of the screw head and then it worked fine.

I don't use it now though, the bracket for the glow clip-on thingamabob is bolted right to the engine mount lug.

[TheBum]

Mine's available again. The original interested party found another one from a local flyer