Belt-CP Throttle curve

[sortegon]

Hey guys,
Whats the best throttle curve you may suggest for the belt-cp with original motor??
I´ve tried the one suggested for Trex450... 0, 80, 90, 100 but makes too sensitive the stick input...
Right now Im using a linear one, but would like to hear other opinions.

[helihathnofury]

Well I am far from an expert in this, but have recently spent a lot of time playing with pitch and throttle curves on my Spektrum DX6i.
It is generally accepted that the Belt [and most copters] fly better with a high head speed and lower pitch angle; more stable. After a Lama, the Belt at 70% and not even at lift off is initially scary, but you'll get used to the noise!!! So at the moment the curves I use are:
NORM
THROTTLE 0,35,70,85,100
PITCH 45,50,55,75,100
Most guys use the following for IDLE UP:
THROTTLE 100,90,80,90,100
PITCH 0,25,50,75,100 [linear]
The high [70%] at mid-stick is a personal preference, as I like to lift at just after mid stick, and the added bonus of higher throttle settings is that you will ultimately be much closer to the STUNT/IDLE UP settings. I don't use the EXPO or Dual Rate either.

Hope that helps, and if anyone has any other thoughts on this, I'd be interested too.

Mike:cheers

[sortegon]

That sounds pretty good... I´ll try them at lunch time...
thanks!