Funkey Breitling / Trex 600e / JR G770 3d

[aussietrex450]

Big hello to all the scale owners.
I will be posting a build report with photo's to follow shortly of my first scale project. First step is to build & setup the trex 600e in stock form before fitting to the funkey breitling fuselage. I am just about to complete the stock build with just the gyro to sort out and the throttle & pitch curves to programme into the tx. If anyone can give me some settings or ideas for the DX7 tx G770 3d gyro & 8900 tail servo it would greatly appreciated bearing mind I want the gyro to behave fairly dosile being a scale project. No 3d for this baby, I am going for realism for this project.
Pictures will follow from the complete stock 600e with in depth progess reports & photo's of the scale fit out.

[WayneBrown]

follow the instructions that come with the 770. You may dial down the pirouette rate by reducing the value for rudder endpoints.

[Bobbyk]

follow the instructions that come with the 770. You may dial down the pirouette rate by reducing the value for rudder endpoints.

I second that, follow the manual.

Do you have a link on the fuse, I am looking for a fuse for my T600E, but I'm thinking of the Bell 222, with a flybarless system.

Thanks

Robert

[aussietrex450]

Here's is the link to the breitling fuselage.
http://www.centuryheli.com/products/fuselages/funkey/CN4042E/JAlbum_yellow/index.html?currentid=403

[aussietrex450]

Progress report is as follows. The trex 600e is finished and it's fly time. I will give flight & picture details in the next couple of day's. I have come to a dead end with the scale fuse though. The supplier who originally had one has let me down, the show must go on. This has put a bit of a spanner in the works. I'm now having trouble locating one. If anyone can help me out with a funkey 500e breitling could you let me know please.