Splix
05-26-2008, 12:30 PM
I have 2 Trex 450 SE's. 1 is a v1, and the other is a v2. Both are full metal and carbon fiber everything. I'll go through them one at a time.
Trex 450se V2. Silver carbon fiber frame and fin set. Full cnc metal head and tail, hs65-mg servos on cyclic, s9257 on tail, 401 gyro, ar6100 rx, 35x esc, Align 430XL motor on 12t, extended battery trey, carbon tail blades, trueblood dampening, gorilla gear, + the usuals. I fly this heli pretty much every day. Its fully 3D capable and setup that way.
Trex 450se V1. Black carbon fiber everything. Full cnc metal head and tail, hs-56hb's on all, ar6100 rx, 401 gyro, 35x ESC, Align 430XL motor on 12t, CF boom, CF tail blades, CF main blades, CF fin set. This heli has NEVER BEEN FLOWN ONCE! I bought it from a guy who never put it together, I put it together without electronics for now. I have everything here to make it RTF, which I can if you want before you buy it.
I am also including my DX6i TX, which is already setup for both heli's.
And here is the list of spare parts:
2 1800mAh 20c 3s eflight lipo's (30 cycles each)
1 align 2100mAh 22c 3s lipo (20 cycles)
1 thunder power extreme v2 2200mAh 25c 3s lipo (3 cycles)
3 cell lipo charger and balancer combo with both AC and DC adapters.
AR6100 receiver (NIP)
4 sets of align 325 wood blades
1 set hyperion 325 CF blades
1 align 325 CF blade
1 hyperion 325 CF blade
4 sets of trex 450 carbon tail blades
5 flybar paddles
2 sets of thrust berrings
10 main shafts
11 main gears
3 tail drive gears
12 tail shafts
2 tail belt drive shafts
7 flybars
7 feathering shafts
2 packs of ball limk sets
linkage rod set
5 tail belts
4 sets of v2 trueblood dampening
o ring sets
spare washout base
4 sets of boom braces
4 tail linkage rods
3 aluminum booms
tail assembly
New plastic canopy
Fiberglass canopy (align painted)
Plastic frame bottom
Silver CF frame side
3 sets of Align blade grip holders
2 small aluminum align cases
4 cnc washout control arms
Align 430 motor (brand new)
landing gear set
3 hs-56hb carbonite gear sets
a bunch of random other small parts like one-way berrings, cnc tail blade grips, whole screw sets, flybar weights, pinion gears, etc.
NO I WILL NOT PART OUT.
I'd like to get $1300 shipped for everything listed. This is the most perfect 450 starter setup you can find. A heli already setup perfect, a brand new 450 you can start on yourself, charger, plenty of batteries, tx, so many free crashes worth of parts you LHS would be jealous. Its all here.
The reason I'm selling everything is because its a busy and expensive time of year for me right now. Closing on a house in june, getting married in July, etc. I'm not really getting out of the hobby, just kind of pausing for now until everything isnt so crazy and expensive.
Pictures:
http://i183.photobucket.com/albums/...ic/CIMG0724.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0724.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0725.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0725.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0726.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0726.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0727.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0727.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0728.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0728.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0729.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0729.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0730.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0730.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0731.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0731.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0732.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0732.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0733.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0733.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0734.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0734.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0735.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0735.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0736.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0736.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0737.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0737.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0738.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0738.jpg)
Trex 450se V2. Silver carbon fiber frame and fin set. Full cnc metal head and tail, hs65-mg servos on cyclic, s9257 on tail, 401 gyro, ar6100 rx, 35x esc, Align 430XL motor on 12t, extended battery trey, carbon tail blades, trueblood dampening, gorilla gear, + the usuals. I fly this heli pretty much every day. Its fully 3D capable and setup that way.
Trex 450se V1. Black carbon fiber everything. Full cnc metal head and tail, hs-56hb's on all, ar6100 rx, 401 gyro, 35x ESC, Align 430XL motor on 12t, CF boom, CF tail blades, CF main blades, CF fin set. This heli has NEVER BEEN FLOWN ONCE! I bought it from a guy who never put it together, I put it together without electronics for now. I have everything here to make it RTF, which I can if you want before you buy it.
I am also including my DX6i TX, which is already setup for both heli's.
And here is the list of spare parts:
2 1800mAh 20c 3s eflight lipo's (30 cycles each)
1 align 2100mAh 22c 3s lipo (20 cycles)
1 thunder power extreme v2 2200mAh 25c 3s lipo (3 cycles)
3 cell lipo charger and balancer combo with both AC and DC adapters.
AR6100 receiver (NIP)
4 sets of align 325 wood blades
1 set hyperion 325 CF blades
1 align 325 CF blade
1 hyperion 325 CF blade
4 sets of trex 450 carbon tail blades
5 flybar paddles
2 sets of thrust berrings
10 main shafts
11 main gears
3 tail drive gears
12 tail shafts
2 tail belt drive shafts
7 flybars
7 feathering shafts
2 packs of ball limk sets
linkage rod set
5 tail belts
4 sets of v2 trueblood dampening
o ring sets
spare washout base
4 sets of boom braces
4 tail linkage rods
3 aluminum booms
tail assembly
New plastic canopy
Fiberglass canopy (align painted)
Plastic frame bottom
Silver CF frame side
3 sets of Align blade grip holders
2 small aluminum align cases
4 cnc washout control arms
Align 430 motor (brand new)
landing gear set
3 hs-56hb carbonite gear sets
a bunch of random other small parts like one-way berrings, cnc tail blade grips, whole screw sets, flybar weights, pinion gears, etc.
NO I WILL NOT PART OUT.
I'd like to get $1300 shipped for everything listed. This is the most perfect 450 starter setup you can find. A heli already setup perfect, a brand new 450 you can start on yourself, charger, plenty of batteries, tx, so many free crashes worth of parts you LHS would be jealous. Its all here.
The reason I'm selling everything is because its a busy and expensive time of year for me right now. Closing on a house in june, getting married in July, etc. I'm not really getting out of the hobby, just kind of pausing for now until everything isnt so crazy and expensive.
Pictures:
http://i183.photobucket.com/albums/...ic/CIMG0724.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0724.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0725.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0725.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0726.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0726.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0727.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0727.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0728.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0728.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0729.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0729.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0730.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0730.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0731.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0731.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0732.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0732.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0733.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0733.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0734.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0734.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0735.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0735.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0736.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0736.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0737.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0737.jpg)
http://i183.photobucket.com/albums/...ic/CIMG0738.jpg (http://i183.photobucket.com/albums/x271/majastic/CIMG0738.jpg)