Charging Night Blades

[Grimmer04]

Making the step into night flying..... Yeah! Anyhow my question is about charging the Align night blades. I see both the 325mm and the 600mm have li-ion batteries. Both have a charger that is sold with the blades. The 325's have a charger rated output of 10mA while the 600's have a charger rated at 60mA. I really don't want all these chargers around. I have a FMA CellPro 10S which can be set for the Li-Ion battery type and the correct charge rate. Anybody have idea's on how I would hook up the charge leads? Anybody doing this that could give adivce?

[Grimmer04]

Guess I asked a question to dumb or too difficult. I'll figure it out myself, spend a little money, spend a little time.

[Finless]

I don;t have a charger on hand but use a volt meter to see which wires from the wall wart charger output Positive and Negative and make a plug to the charger cord thingy (that has the LEDs) for your CellPro charger! Should be simple and I see no reason you cant do it. Again charge rate IS important so make sure to get it right! Lion's will POP if charged too fast.

Bob