Futaba 9CHPS and Logictech LTG2100T LTS 3100G setup help

[shesha]

Hi folks, am having some issues with setting up the logictech gyro + servo to work with the Futaba 9C radio, am more well versed with JR radios and not really sure if the problem is radio related or gyro related.

Already went through the entire setup procedure for the LTG as per the manual and set everything correctly however the rudder servo is responding in one specific direction, as in when I turn left it responds but in when i push right on the rudder stick it does not move back. In rate mode.

The gyro will go from HH and to rate mode without any issues but seems to be the servo thats not responding right.

I have the gyro hooked on CH4 and Gain on 5 can anyone advise if they faced any problems ?

[shesha]

Well never mind, I found the problem, apparently you have to make sure the tail servo is not connected during the first initial 3 steps of setting up the gyro, then you have to cycle the power and continue with the setup, voila.......