Raptor v1, v2, titan

[bpd964]

Hello all..

I just aquired a Raptor 50 titan and wanted to pick up a few extra parts for it but I'm not sure exactly what the difference is between the v1, v2 or titan.. most parts say for v1 or v2 but very few "titan" specific parts..

Are they all interchangeable? what's the difference?

Thanks..

[BarracudaHockey]

The Titan is a V2 with a few exceptions.
Tail boom, and belt, boom supports, skids, tail pitch control rod, and that crappy push pull collective.

There's a few other subtle differences but with the exception of the boom, belt and tail rod, all of the v2 parts fit the Titan.

[bpd964]

The Titan is a V2 with a few exceptions.
Tail boom, and belt, boom supports, skids, tail pitch control rod, and that crappy push pull collective.

There's a few other subtle differences but with the exception of the boom, belt and tail rod, all of the v2 parts fit the Titan.

Thank you very much..

[Raptorman37]

Cuda, why is the push pull collective crappy? just unnecessary?

[BarracudaHockey]

I don't like the geometry and the fairly low end points I had to use to get it to work on a couple of them I built for people.

That and I prefer the rudder servo up front. The only thing it really does is reduce the side load on the servo output a bit but I've got hundreds of flights on a 9252 and a 9451 on my Raptors and dont see any wear from the collective.

Use a nice stiff wheel with a hole drilled, flip the servo over, and you get a very good collective servo setup on the Raptor 50s.

[Raptorman37]

I prefer the servo up front too, i don't want my $110 servo to get oil logged.:YeaBaby: