missle
05-31-2008, 07:46 PM
I've posted in the other forum with pics so go here to see: http://www.rcgroups.com/forums/showthread.php?t=872762
I'm clearing out for bigger birds (Rex 600E and Deuces Wild) so I've got free up some funds. This is what I've got:
First heli is a Trex 450 that I absolutely love. This thing is SUPER POWERFULL with a TP2200 4S1P battery, and produces HS > 3300 without breaking a sweat (remember that a 3S setup at 3300 is far less than a 4S setup at 3300). This heli has the following options:
Metal head to indclude grips, flybar cage, seesaw, swash
Metal bearing blocks
Metal boom block
Metal boom support bracket
Metal Tail assembly
Metal tail servo holder
V1 spindle (3mm instead of 4mm)
V2 Main and tail gears
V1 tail pitch assembly
HS-65 METAL gear on collective and cyclic
HS-6965 Digital Tail servo - high performance, coreless motor, input V 4.8-6.0, torque 111 oz-in, speed 0.8 sec (far stronger the the 96's)
Futaba 401 gyro
CF tail servo rod
Metal Blue skids
Align 75a ESC - supports up to 25.2V, 2-10pole motors, up to 630,000rpm
Eflite 6 series motor with 11, 12, and 13 tooth pinions
Novak External BEC - 6V output at 3A
Align 325 Carbon Blade
1 Thunder Power 4S1P 2200 mah battery
1 Clear NIP fuse
The 2nd Trex is one I built about a month ago and is a 3S setup that's a little more tame than the one above. This heli has the following options:
Metal head to indclude grips, flybar cage, seesaw, swash
Metal bearing blocks
Metal boom block
Metal boom support bracket
Metal Tail assembly
Metal tail servo holder
Metal belt gear holder
Metal tail blade holders
V1 spindle (3mm instead of 4mm)
V2 Main and tail gears
V2 tail pitch assembly
HS-65 karbonite gear on collective and cyclic
HS-82 Tail servo - high performance, input V 4.8-6.0, torque 48 oz-in, speed 0.1 sec
Futaba 401 gyro
Align 35a ESC
Align 430L 3550kv motor with 11, 12, and 13 tooth pinions
Dimension Engineering External BEC - 6V output at 3A
Align 325 Carbon Blade
1 Flight Power 3S1P 2500 mah battery
1 Clear NIP fuse
I posted some pics of both helis and as you can see, there are no exposed wires or junk (I can take more pics upon request). I assemble all my heli's with the goal of an extremely clean look. I used paste threadlock on all metal-to-metal screw joints, and plastic glue for all metal-to-plastic joints. BOTH heli's are better than new because they're assembled, trimmed, well tested and well flown. Both are setup for +/- 11deg pitch.
Because I need to sell at least one of these heli's this weekend (I plan to keep the one that doesn't sell first), I'll take $550 for the 4S heli (first one described above) or $475 for the 3S heli (second one above) but I'm slightly open to offers.
In addition to those rock bottom prices, if the buyer would like I'll even throw in my DX6 radio and reciever to make this a complete OPEN-THE-BOX, PLUG-IN-THE-BATTERY, AND-GO-DO-EXTREME-3D for only $100 more! (yea that's right a DX6 radio and reciever for half price)
Again:
#1 heli with 4S power setup (600 watts) for $550 (or $650 with radio/rec included)
#2 heli with 3S power setup for $475 (or 575 with radio/rec included)
BTW, only reason I'm including the radio/rec is because I need a 7+ channel radio and I'm ordering a 9303.
I'm clearing out for bigger birds (Rex 600E and Deuces Wild) so I've got free up some funds. This is what I've got:
First heli is a Trex 450 that I absolutely love. This thing is SUPER POWERFULL with a TP2200 4S1P battery, and produces HS > 3300 without breaking a sweat (remember that a 3S setup at 3300 is far less than a 4S setup at 3300). This heli has the following options:
Metal head to indclude grips, flybar cage, seesaw, swash
Metal bearing blocks
Metal boom block
Metal boom support bracket
Metal Tail assembly
Metal tail servo holder
V1 spindle (3mm instead of 4mm)
V2 Main and tail gears
V1 tail pitch assembly
HS-65 METAL gear on collective and cyclic
HS-6965 Digital Tail servo - high performance, coreless motor, input V 4.8-6.0, torque 111 oz-in, speed 0.8 sec (far stronger the the 96's)
Futaba 401 gyro
CF tail servo rod
Metal Blue skids
Align 75a ESC - supports up to 25.2V, 2-10pole motors, up to 630,000rpm
Eflite 6 series motor with 11, 12, and 13 tooth pinions
Novak External BEC - 6V output at 3A
Align 325 Carbon Blade
1 Thunder Power 4S1P 2200 mah battery
1 Clear NIP fuse
The 2nd Trex is one I built about a month ago and is a 3S setup that's a little more tame than the one above. This heli has the following options:
Metal head to indclude grips, flybar cage, seesaw, swash
Metal bearing blocks
Metal boom block
Metal boom support bracket
Metal Tail assembly
Metal tail servo holder
Metal belt gear holder
Metal tail blade holders
V1 spindle (3mm instead of 4mm)
V2 Main and tail gears
V2 tail pitch assembly
HS-65 karbonite gear on collective and cyclic
HS-82 Tail servo - high performance, input V 4.8-6.0, torque 48 oz-in, speed 0.1 sec
Futaba 401 gyro
Align 35a ESC
Align 430L 3550kv motor with 11, 12, and 13 tooth pinions
Dimension Engineering External BEC - 6V output at 3A
Align 325 Carbon Blade
1 Flight Power 3S1P 2500 mah battery
1 Clear NIP fuse
I posted some pics of both helis and as you can see, there are no exposed wires or junk (I can take more pics upon request). I assemble all my heli's with the goal of an extremely clean look. I used paste threadlock on all metal-to-metal screw joints, and plastic glue for all metal-to-plastic joints. BOTH heli's are better than new because they're assembled, trimmed, well tested and well flown. Both are setup for +/- 11deg pitch.
Because I need to sell at least one of these heli's this weekend (I plan to keep the one that doesn't sell first), I'll take $550 for the 4S heli (first one described above) or $475 for the 3S heli (second one above) but I'm slightly open to offers.
In addition to those rock bottom prices, if the buyer would like I'll even throw in my DX6 radio and reciever to make this a complete OPEN-THE-BOX, PLUG-IN-THE-BATTERY, AND-GO-DO-EXTREME-3D for only $100 more! (yea that's right a DX6 radio and reciever for half price)
Again:
#1 heli with 4S power setup (600 watts) for $550 (or $650 with radio/rec included)
#2 heli with 3S power setup for $475 (or 575 with radio/rec included)
BTW, only reason I'm including the radio/rec is because I need a 7+ channel radio and I'm ordering a 9303.