Help with new DX 7

[Jupiter20060]

Just bought the new rx & tx servo kit(heli version) Could someone PLEASE!!!!!!!!!!! help explain to me what i needto do to get this sytym to work on blade cp or venom nr3d??????? Do i have to buy anything extra??????? Do i just take the 4 n 1 , on blade cp or venom 3d control unit on nr3d off and strap down reciever from dx7 plug servos in setup radio be done ???? what about gyro and speed control ?????? I know the 4n1 on blade cp and control unit on Venom nr3d does all this .i bout a little efite gyro g110 just in case i needed it i dont know?????? Ive been flying with thunder power 1320 lipo battery.the rx battery that came with the dx7,do i have to use it when i fly. if so the 1320 lipo is of no use. which would be a shame $50.00.should i just have stayed with the stock radios for these helis. i was hoping the dx 7 would help me setup and fly my little helis better???????? Thanks in advance for any help or advice. Jupiter:arggg::arggg:

[JasonJ]

You need to have an esc, brushless main motor (since you are getting an esc), small 5 amp esc for the tail motor, and a gyro. Make sure the tail esc is for brushed motors, and you do not want to use a brushless tail motor, people say it responds poorly. One day when I am bored I will do this to my walkera 22e (which your Venom is a rebadged version of). Then you have some fun programming to do...

[Jupiter20060]

Thanks Jason J, for the help.I figured it wasnt quite as easy (cheap) as I hoped. I have messed arond with this blade cp so long. So much $ crashing and learning.I can now fly around pretty good till blade cp starts squirrelling out,no 3D. I just put my venom back together its been put up for a yr. New crashed once thought id use it with new dx7 These little helis with tail motor.In yours or anyones thoughts since i have this Brand Spanking New DX7 equip. maybe take the plunge for trex or blde 400 something without a tail motor.And go ahead and put the squirrells on the shelf for awhile. Thanks to all for any advice. Jupiter