FUTABA 7C 2.4 GHZ-no throttle operation at all

[stick]

Hello,maybe someone here can help me.This is on a t-rex 600 electric. I went from a hitec eclipse7radio and hitec supreme 2 receiver to a futaba 7c 2.4 ghz transmitter and receiver and now i have no throttle.ev rything else works fine except for the throttle. I even reconnected the hitec receiver and used the hitec transmitter and the throttle operated normally .I reconnected the futaba receiver and still no throttle.The speed control , eng. and bec are all align that came with the kit..Any help on what I am doing wrong or missed would be greatly appreciated.. ok maybe this will help since i have people looking at my prob.in another thread but not posting a reply. its as if with the new radio the esc wont arm so it will operate the motor,i get no rpm's at all just the swash going up and down with the throttle stick preciated..Thanks,Stumped

[fritzthecat]

Futaba needs the Throttle channel REVersed to function with an ESC.

Fritz

[stick]

Brilliant, I just went and did that and it works great. Thank you....,I should have known it was something simple that I was overlooking .Its always simple when you now know the answer lol.

[Spawnmen]

Throttle channel revers ? You mean in revers menu (for channels) or reversing in system menu, where you can change your mode ?
I fly normaly with thorottle reversed - means full trhottle (push the stick towards me, when it´s from me, then there is 0% throttle).
So I had to change it in system menu (where you can change your mode also), but then, the throttle works, but it was in different direction (full throttle when the stick is from me - so I had to change it also in revers menu (where you can reverse also other channels)).

So I am wondering, if you mean thy system menu or just "normal revers" ... thanks .-).