juneebear
06-02-2008, 09:51 PM
HDX 500SE for sale with Spare parts. I have this heli for 3 months now and flew it for 4 times. NO crashes. All original parts still intact. Heli is set up to run on a 4S lipo.
Here are the specs :
Futaba S9650 tail servo
Futaba GY401 gyro
3X Hitec HS81 metal gear servos for cyclics
HDX 500 Brushless motor 850KV w/ heat sink and 24T pinion
Hobby Wing Pentium Brushless ESC 60A-OPTO
Hobby Wing Switchable U-BEC 3A 5/6V
425 mm FG Main Blades
GAUI Hurricane 550 Landing gear
Stock blue FG canopy
NOTE : Stock main gear was upgrade to Microheli Precision CNC main gear.
Spare parts include the following :
3 Flybar rods
1 Flybar paddle
1 Stock landing gear
1 Hyperflex Aluminum Landing gear
1 FUSUNO Orange FG Canopy
1 Horizontal Fin
1 Hobby Wing ESC program card
NIP Spare parts includes the following:
2 NIP Plastic Ball Ends
1 Aluminum tailboom HDX500-64
1 Main shaft HDX500-37
1 Featherin shaft HDX500-36
1 Auto Rotation hub w/ oneway bearing HDX500-42
1 Tail shaft HDX500-33
1 MetalCNC tail pulley (13T) HDX500-35V2
1 Tail blade HDX500-90
Also included are 4 4S lipo packs:
1 Hextronik 4100mAh 25C (6 cycles)
Also included are manuals for the Heli, ESC and program card.
All you need is your own TX and RX and you RTF.
$660.00 includes 1 4S lipo pack (Hextronik 4100mAh).
Price includes shipping (to CONUS only) and PP fees.
Some items listed are not in the pics. But can be send if requested.
Here are the specs :
Futaba S9650 tail servo
Futaba GY401 gyro
3X Hitec HS81 metal gear servos for cyclics
HDX 500 Brushless motor 850KV w/ heat sink and 24T pinion
Hobby Wing Pentium Brushless ESC 60A-OPTO
Hobby Wing Switchable U-BEC 3A 5/6V
425 mm FG Main Blades
GAUI Hurricane 550 Landing gear
Stock blue FG canopy
NOTE : Stock main gear was upgrade to Microheli Precision CNC main gear.
Spare parts include the following :
3 Flybar rods
1 Flybar paddle
1 Stock landing gear
1 Hyperflex Aluminum Landing gear
1 FUSUNO Orange FG Canopy
1 Horizontal Fin
1 Hobby Wing ESC program card
NIP Spare parts includes the following:
2 NIP Plastic Ball Ends
1 Aluminum tailboom HDX500-64
1 Main shaft HDX500-37
1 Featherin shaft HDX500-36
1 Auto Rotation hub w/ oneway bearing HDX500-42
1 Tail shaft HDX500-33
1 MetalCNC tail pulley (13T) HDX500-35V2
1 Tail blade HDX500-90
Also included are 4 4S lipo packs:
1 Hextronik 4100mAh 25C (6 cycles)
Also included are manuals for the Heli, ESC and program card.
All you need is your own TX and RX and you RTF.
$660.00 includes 1 4S lipo pack (Hextronik 4100mAh).
Price includes shipping (to CONUS only) and PP fees.
Some items listed are not in the pics. But can be send if requested.