PDA

View Full Version : Is there a better manual for 7C FASST?

igorek82
06-05-2008, 09:46 AM
Hi!

Is there a "better" manual for a 7C FASST?
The one that came with it seems to be extremely useless :thumbdown:

Also, did anyone have any luck setting it up as a controller in RealFlight G4? What settings are you using? Do you notice any difference in the sim when you change stuff on your radio (throttle curve, pitch curve, etc...) or is it all pre-programmed in the sim?

Thanks in advance!
jonestrex450
06-05-2008, 01:07 PM
The manual seems fine to me!
redcat
06-06-2008, 04:19 AM
what are you having problems with?
I have it setup now with a belt cp and trex 450 no probs..

in the g4 i'm using my 7c just as a four channel controller.. so no curves or anything.. that should be set in the aircraft in the sim itself i reckon
igorek82
06-06-2008, 11:24 AM
in the g4 i'm using my 7c just as a four channel controller.. so no curves or anything.. that should be set in the aircraft in the sim itself i reckon


I was trying to make "curves" work... and for some reason i can't get the G4 to sense the H (throttle hold) from the Futaba 7C....
skaluf
07-03-2008, 10:12 AM
Hi!

Is there a "better" manual for a 7C FASST?
The one that came with it seems to be extremely useless :thumbdown:

Also, did anyone have any luck setting it up as a controller in RealFlight G4? What settings are you using? Do you notice any difference in the sim when you change stuff on your radio (throttle curve, pitch curve, etc...) or is it all pre-programmed in the sim?

Thanks in advance!

This one is great, written by a former Hobbico employee.

Steve
skaluf
07-03-2008, 10:14 AM
This one is great, written by a former Hobbico employee.

Steve

Sorry, I forgot to include the link: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNXU7&P=ML
igorek82
07-03-2008, 10:44 AM
Thanks!!!!!!!
1banger
07-18-2008, 02:32 PM
That 7C book was first published in 1996. Is this relevant to the new 7C 2.4??

I imagine that some programming options and procedures have had to change
since then....
DavidH
07-18-2008, 04:00 PM
That 7C book was first published in 1996. Is this relevant to the new 7C 2.4??

I imagine that some programming options and procedures have had to change
since then....


http://manuals.hobbico.com/fut/7c-2_4ghz-manual.pdf

7C 2.4Ghz has its own manual.

As for the book about the 7C being published in 1996. Don't know why there would be a book in 96 for a radio that didn't come out till about 2003. <G>

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXNXU7&P=ML
Copyright on the book is 2006.

David
1banger
07-18-2008, 07:06 PM
Yeah it looks like amazon.com had it screwed up!