stg099
06-05-2008, 11:54 PM
NEW PRICE $625 shipped for everything...
So after much pondering and tossing ideas around, there just isn’t enough room to put a 500 in the stable if I keep my 450. The list of upgrades and extras is a long one, and this heli gets comments every time I fly it with guys stating that it is the smoothest, best flying 450 they’ve seen. I’ve spent a lot of time setting this heli up to make it as close to perfect as it can get, and it really does fly well. It will do everything that my 600 will do and more and I hate to put it on the block, but the 500 is calling my name. I will try my best to describe everything in detail in this ad, but feel free to email me or PM with questions. I would prefer to sell it as a package because there is just too much here to try to sell separately.
THE HELI: All V2 minus head block, grips and feathering shaft. All silver CF and blue aluminum. Some of the upgrades include:
Gorilla gear programmable paddles (yellow)
Gorilla gear landing gear (not installed but included (yellow))
Custom painted canopy (painted myself)
Trueblood Dampners
220 mm flybar
3 HS 65 hb servos converting to MG last week with metal gear sets
SCORPION 2221-8 motor w/ 13T pinion ( hard to find, and VERY powerful)
Align BL35g ESC
The heli currently has a GY401 and 9650 servo installed. Also installed is an AR6100e receiver.
CARRYING CASE – Included in this package will be an aluminum carrying case that I picked up from helidirect. It has room for 5 lipos, your transmitter and the 450, as well as cutouts for allen drivers and other odds and ends. Perfect shape.
EXTRAS – Let me start by saying, there is almost enough here to build an entire new 450sa. These spares are mainly NIP, but some have light use.
Blades:
1 pr NIP Align white carbon 325 mm
1 pr Align 325 pro woodies
1 pr “no name” carbon blades
1 pair K&B dream design tail blades
1 pair gorilla gear tail blades
3 pair Align “bat” style tail blades
Parts
1 pr gorilla gear in yellow
One way bearing shaft collars NIP
One way bearing tool NIP
One way bearing NIP
Blade balancer
1 pair Align 3K CF paddles
1 pair stock paddles
Metal tail drive gear NIP
1 Full Aluminum frame set with tail drive gear, gyro mount, plastic bearing and tail blocks, bottom plate and CF battery tray
1 pr CF fin set
4 feathering shafts
1 pr true blood ampners NIP
3 sets of Align dampners
2 CF boom supports
1 boom clamp
1 tail boom
2 extra skids
1 22o mm flybar
2 195 mm flybars
4 Main shafts with collars NIP
1 complete plastic tail assembly
! aluminum head block with feathering shaft, grips, bearings, spacers and dampners
Blue aluminum mixing arms with pitch slider
Plastic swashplate
Swash retainer
Tail drive belt NIP
2 12T pinions NIP
430 L brushless motor
Metal canopy mounts (not pictured)
3 blue main gears (not pictured)
3 blue autorotation gears (not pictured)
Ther is still probably more odds and ends that I have around that could be included.
I don’t have the heart to go through and add everything up, but I will let it all go for $625 shipped.
So after much pondering and tossing ideas around, there just isn’t enough room to put a 500 in the stable if I keep my 450. The list of upgrades and extras is a long one, and this heli gets comments every time I fly it with guys stating that it is the smoothest, best flying 450 they’ve seen. I’ve spent a lot of time setting this heli up to make it as close to perfect as it can get, and it really does fly well. It will do everything that my 600 will do and more and I hate to put it on the block, but the 500 is calling my name. I will try my best to describe everything in detail in this ad, but feel free to email me or PM with questions. I would prefer to sell it as a package because there is just too much here to try to sell separately.
THE HELI: All V2 minus head block, grips and feathering shaft. All silver CF and blue aluminum. Some of the upgrades include:
Gorilla gear programmable paddles (yellow)
Gorilla gear landing gear (not installed but included (yellow))
Custom painted canopy (painted myself)
Trueblood Dampners
220 mm flybar
3 HS 65 hb servos converting to MG last week with metal gear sets
SCORPION 2221-8 motor w/ 13T pinion ( hard to find, and VERY powerful)
Align BL35g ESC
The heli currently has a GY401 and 9650 servo installed. Also installed is an AR6100e receiver.
CARRYING CASE – Included in this package will be an aluminum carrying case that I picked up from helidirect. It has room for 5 lipos, your transmitter and the 450, as well as cutouts for allen drivers and other odds and ends. Perfect shape.
EXTRAS – Let me start by saying, there is almost enough here to build an entire new 450sa. These spares are mainly NIP, but some have light use.
Blades:
1 pr NIP Align white carbon 325 mm
1 pr Align 325 pro woodies
1 pr “no name” carbon blades
1 pair K&B dream design tail blades
1 pair gorilla gear tail blades
3 pair Align “bat” style tail blades
Parts
1 pr gorilla gear in yellow
One way bearing shaft collars NIP
One way bearing tool NIP
One way bearing NIP
Blade balancer
1 pair Align 3K CF paddles
1 pair stock paddles
Metal tail drive gear NIP
1 Full Aluminum frame set with tail drive gear, gyro mount, plastic bearing and tail blocks, bottom plate and CF battery tray
1 pr CF fin set
4 feathering shafts
1 pr true blood ampners NIP
3 sets of Align dampners
2 CF boom supports
1 boom clamp
1 tail boom
2 extra skids
1 22o mm flybar
2 195 mm flybars
4 Main shafts with collars NIP
1 complete plastic tail assembly
! aluminum head block with feathering shaft, grips, bearings, spacers and dampners
Blue aluminum mixing arms with pitch slider
Plastic swashplate
Swash retainer
Tail drive belt NIP
2 12T pinions NIP
430 L brushless motor
Metal canopy mounts (not pictured)
3 blue main gears (not pictured)
3 blue autorotation gears (not pictured)
Ther is still probably more odds and ends that I have around that could be included.
I don’t have the heart to go through and add everything up, but I will let it all go for $625 shipped.