problem of desserage bars bell

[nox]

Hello, I am French, and I have Hawk sport equipped with a OS 37 I turn into 10% of nitro, veiled my problem: my arms of mixing of the bar of bell take plays horizontally... I do not find the means of in empecher...? one idéé

thanks !!


@+

[OzarkCopterBum]

Kind of hard to decipher what the exact problem is. Anyone here speak french?

Nox, Try describing whats happening line by line and what transmitter you have.

[nox]

Hello I have a T7CP. my problem and that the screws in compression of arm of levers did not fall in place from the meplats envisaged on the bar from bell! I have thus to grind 2 others meplats so that that holds but it is not merveilleu... Think that I must assemble the option to move up a bar of bell 4 mm?

I also puts it in French:

Salut J'ai une T7CP. mon probleme et que les vis de pression de bras de leviers ne tombaient pas en place des meplats prévu sur la barre de bell ! j'ai donc meuler 2 autres meplats pour que cela tienne mais c'est pas merveilleu... Pensez vous que je doit monter l'option pour monter une barre de bell 4 mm ?

:?
thank you for the answers

[marked23]

by "meplats" he means "flats"
by "bar from bell" he means "flybar." (a better name would be "barre de hiller")

The 3mm flybar is fine on the Hawk. It's certainly possible that the flybar was mis-manufactured. Are you sure you have all the proper washers and spacers? I have not seen a 4mm flybar upgrade for the Hawk, but one might be available. It isn't necessary. You might just try gettting a replacement flybar part

My guess is that you are just missing some washers or spacers on your flybar.

See picture "6.1" in the manual... Do you have all the parts?
http://www.centuryheli.com/support/manuals/cn1000c_hawk_pro/cn1000c_web.pdf

-Mark

[nox]

Me I have a hawk sport and if you look at well on the handbook of Hawk sport you will apperevrez yourselves that there is not the protuberance in metal which accepts the screw in compression on the flybar if not for the kit of conversion into 4 mm : http://www.heli-world.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=CN2232&Category_Code=opt-century


bye

[Rodney]

I know what he means. He is talking about the flat spots on the flybar for the flybar control arms to locate on. I have built of 25 hawks and have not seen one with them in the right spot yet. When you tighten up the set screw the arms become uneven. What I have done is turned over the flybar and made my own flats on it.

[tnreefguy]

Bonjour, Je ne pale pas francias, After two years of it in high school thats all I remember. Nice to see some new international faces here. Le hauk et bon mache LOL :lol: