Last items for 450's

[Icman69]

OK on the block last of my heli stuff.

All my batteries with which includes 4 new about 10 cycles each Air thunder 2200MAH 11.1 V 25C batteries, 3 other misc batteries with some flights left in them in them. new 2010 thunder power balancer, New Sentry battery tester. All are setup with deans connectors. It all comes in a V2 aluminum case with nice padding added and custom cut for this stuff. Picture in this thread http://helifreak.com/showthread.php?t=74904 the thunder power batterys cost 64.99 each.

I also have a load of 450 spares about 400 worth Pictures on request I have not had time to make a list. Most are new in the package.

If interested please Email me only my PM's are turned off as well as email from the site.

Let it all go for 350.00 Plus PP fees and shipping lower 48 only. This week only if not off to Ebay.

My email is dlwarrick@bellsouth.net

[Splix]

Sent email

[Icman69]

Price Lowered final offer before I send it off to Ebay PM's turned back on.

[Icman69]

1 Set Landing Gear Chrome
4 Tail Belts
6 sets Aluminum Landing Skids
1 NIP Blade holder
2 White Tail gear drive sets
2 Dark Blue tail drive gear sets
1 set of one way bearing shaft colors NIP
1 Set NIP blue tail servo mounts
1 Set Plastic Tail Servo Mounts
2 packs of landing skid nuts
1 Used Blue Metal Swash in good shape
1 Microheli tail assembly complete with blades and belt
4 Boom tubes Aluminum 3 gray one gold
2 NIP HS1220T-84 Main gear Sets Dark Blue
3 NIP HS1219 new main gears
2 Tail boom brace sets
1 used 430L motor works great
1 Microheli Motor works fine
1 used HS56 Servo was my spare
1 NIP Main gear Set with 4 bolt bearing dark blue
2 Set of carbon look plastic vertical and horizontal fins
1 set orange and white “”
1 Set White “”
2 set Youngblood Dampers for V1 NIP
3 Feathering shafts HS1003T NIP
2 Packs Of tail rotor shaft HS1021T-1 3 in each pack
2 sets are carbon look tail blades
3 sets of K&B neon yellow tail blades New
1 set carbon look flybar paddles
2 sets yellow tail blades
4 NIP HZ026T one way bearing shafts 2 in each pack
3 sets of 325 carbon Blades
2 sets of used woodys in good shape
1 blue metal tail grip and slider
3 NIP one way bearings
1 flybar
1 bag misc feather shafts approx 15
1 box 200 count stainless align 450 screw set with extras
1 set linkage rods NIP
1 Bag of ball links approx 30
1 set NIP pinions 11/13/15
1 complete plastic head used once.
1 one way bearing removal tool
1 fireup tail mod jig complete
1 swash leveling tool
1 JR ball link sizing tool New
1 set of ball ink measuring tools that attach to your calipers
1 GWS pinion gear puller which is a nice set. New
1 set ball link pliers
2 white main gears with bearings
5 white autorotation gears
1 light blue auto rotation gear
1 Hitec HS 56 Karbonite gear set NIP
1 NIP 5.1 In line regulator
1 used phoenix castle 25AMP ESC with BEC works fine



As a package with the batteries $400.00 listed

[RompingDonkey]

Waiting for the combined price to hit $300 then I'll jump all over it

can even ride out to Lawrenceville to pick the stuff up (I'm in Marietta)

[Icman69]

SOLD ****** Ya Snooze Ya loose:thumbup: