how to ?

[wildflyer]

Just wondering if I could use two gyros on my raptor 50 titan and remove the flybar and use a link directly from the swash to the grips or am I totaly lost here? it will only be for scale flight. Thanks.

[PaulW]

Does tthe Raptor use CCPM (3 servos on the swash) if so which two servos would you link to the gyros? :-)
The CSM system uses two gyros but the signal goes through their Cyclock unit, the cyclock unit takes its input from the transmitter in the form of seperate Aileron, Elevator and pitch (collective) then mixes the signal to move the three servos appropriately. so by putting gyros in the elevator and Aileron input lines the cyclock moves the three servos in response to the gyro signals...
Err, think thats right will tell you in a month or so when I put the system into my second T-rex 600

Paul W.

[wildflyer]

the raptor is not ccpm.

[PaulW]

Hi,
Just reading an old thread on RunRyder dealing with the CSM system ( http://www.runryder.com/helicopter/t303432p1/ ), found a comment on page one about 3/4 way down from the system designer (?) implying that on non ccpm helis you dont need the mixer, just the gyros
Regards

Paul W.