L6003D with 2 parallel 6s 2200 pack

[vicrc]

Has anyone tried 2 paralleled 6s packs on their Logo 600? I have plenty of 6s packs in the range of 2200 to 2500 from my other two helis. Will this be a good setup? I have tried a pair of 2200 on my H550 and power was much more from just one pack. Of course the packs will be from the same manufacturer and about the same cycles.

Or should I just abandoned this idea?

[helicraze]

Logo 600 is really best on 10S.

The setup would be good on logo 500 3D

[Voyager]

I should work fine.

I'm going a similar route for a scale Logo 600.

For my 3d machine, I use 12s a123 packs. HV is much better if you want a good pop in your flying for 3D but for regular fff and learning, 6s is fine.

Really depends on you flying style

... Rob

[vicrc]

Thanks for the input guys. I am trying to save up for the V-bar and purchasing a new set of 10s 5000 packs will just kill it. I am wondering if 12s 2500 or 12s 3300 packs can fly it even if its only a few minutes a flight. Has anyone tried a 12s and how much time and amp they had to put back into the pack?

[LITHIUMSTATIC]

I know of a small few that use 12s setups on the Logo 600. I'd say post a topic about it in the Main Helicopter topics. Their are some that run 12s on rex600, Razor 600, etc etc etc.

I'd think a CC85HV with 12s would work great.... a bit overkill but still should be ok. I don't know what motor to try. Maybe Actro 32-3 or a NEU 1915H :dontknow

[OICU812]

Those small of cells would be dead in no time by running them in series, this I can assure you of, they are simply to small to consider a 12 S setup with this kind of weight. If you wish to do parallel then 5003D would be a better option in regards to disc load and having some lasting results. All imho of course.

[vicrc]

Yesterday, I tried my friends Logo 500 3D with a pair of 6s 2200 25C outrage packs. The two in parallel weighed in at 680grams, probably the lightest weight pack I have seen with a 4400ma rating. If I have to I may end up just doing 6s in parallel instead of 12s. If a heavy ship like a trex600 can fly on 6s a 600 logo would still be light. By the way I charged the two outrage packs and put back around 1000ma to each pack with 4 min of flight time, this is on a head speed of around 2200rpm. The packs did not even come down warm as I would guess they share the amp load. He is using the Hacker 40-8 and CC85HV with 18 pinion. I already have a 500 size heli and want the Logo 600.

[vicrc]

So I am looking at a Z50 600kv and CC85HV with 14T pinion will give me 2286 head speed on 12s. My concern is the Z50 running on 12s.

[ShuNut]

I'm running a similar set up on the Logo 600, using two 6s packs as 12s 37000. Motor is Scorpion 4035-500kv.
Power is crazy, i'm currently running for 5.50 mins and putting back around 2300, so you could do maybe 3 mins or so with a good HS or more with lower.

The other day i flew in idle1 which is around 75% throttle and it still has a decent amount of power doing loops flips rolls ect, i flew for a little over 6 mins and put back 1700mah back in.