LED Lights on AUX 2 channel

[ChasHeliCop]

I want to put LEDs on a scale build with a DX7 and an AR7000 Rx. I want to use the AUX2 channel for the lights. Can anyone tell me how to program the channel for ON in POS 1 and OFF in POS 0 ? :confused: Thanks for your help !

[DJW]

The receiver itself will only provide the control pulse for a servo - you'll need to get a switch circuit to plug in to the receiver, for example:

http://www.dimensionengineering.com/PicoSwitch.htm