Duralites in a P Gasser pics Please

[Rob1962]

Would anyone have a pic of the Duralite system in a Predator Gasser? Thanks :D

[Rudy]

I don't have a photo, and I still working on the layout, but I will try to explay what I have so far.

I have the 4000mah flat pack, wish I had gotten the square pack it would fit better. Any I mount my voltage reg to the battery pack, and then use Velcro strips to mount the battery under the radio try. As the flat battery pack is to wide to inside the edges of the tray and made a small spacer out of wood so that the egages of the radio tray do cut the battery pack.

I had to use a servo ext lead to get power from the reg to the RX. The RX is on top of the radio tray at the very front.

I'm using the GY 601 with the amp mounted on the out of the right radio try supports. The gyro sencer it self is mount on the back of the radio tray just about the fuel tank.

I will try to get a photo to night.

[DebianDog]

Ordered (electronics, heli, Duralites 4000mah flat pack w/regulator switch) but not put together yet. Not even at the house yet :( But it has all shipped :)

[aarinsingh]

I have the 4000 mah square pack, underslung on the battery tray, with the regulator, reciever, gyro on top.