PDA

View Full Version : gasser and gyro choice

miami6
06-17-2008, 08:49 PM
well my gasser need a new gyro combo


i am giving up on the gy401 s9254

my choices are

1 JR 7703d 8900g high speed servo

2 JR7703d/ 810 sport servo has anyone tried this new servo combo setup in a gasser

3 GY611/s9256

4 DS760 / s8900

5 DS760/ s9256

I currently run a 7703d/8900 in a k3dnitro bird its great I had lots of help to set it up radio wise


I like the 8700 servo from JR with its metal gears but they don't make it to work with the 7703d I have been told

please any input in this subject matter will be appriciated
cbergen
06-17-2008, 09:33 PM
770 3D and 8900, DS760 and 8900.
rkeith2
06-18-2008, 12:42 AM
I am using the JR 7703D with 8900 servo combination on my gasser and very happy with the operation, ease of setup and tail authority.
MarkWebber
06-18-2008, 05:21 AM
I'm going to be putting a ds760 in my second gasser, shortly. I'll be using a 9256, just because I've got a spare around. I'd go with the 8900, if you were buying new. "Better, stronger, faster"...;)
Greg Alderman
06-18-2008, 02:30 PM
"Better, stronger, faster"Mark..you the new "6 Million Dollar Man"? :fly

Greg
MarkWebber
06-18-2008, 06:41 PM
The way I feel anymore, I'd suspect it might take that much to get me back into shape.:roll:
miami6
06-21-2008, 11:35 PM
well I pulled the trigger and chose option 4 from my list above


ordered the

ds760 gyro
http://www.spartan-rc.com/products/ds760/banner.jpg

and


JR 8900g tail servo
http://www.jrradios.com/ProdInfo/JRP/250/JRPS8900G-250.jpg

and

zeal tape
http://images.amainhobbies.com/images/medium/kyoz8006.jpg


going back to regular setup instead of my nice push pull that i had


I wish i could put the tail servo up front instead of adding ballast weight oh well future project
MarkWebber
06-22-2008, 07:22 AM
If you're using the Zeal under that gyro, I'd suggest not using the metal plate included with the gyro. It will likely make the stops bouncy.
SeaHawk
06-22-2008, 09:30 AM
what is so special about the DS760 over JR or Futaba servos? Is is simply the PC interface?
george0079
06-22-2008, 10:52 AM
what is so special about the DS760 over JR or Futaba servos? Is is simply the PC interface?
The PC interface is cool. no doubt about that... but the ds760 has the performance edge. Setup is about as simple as it gets, and the performance right out of the box is unbelievable. Plus, the ability to use ANY servo of your choice. And, updateable firmware...

The list goes on