dx6i and ar7000 lights dont work??

[sniper_iron_man]

hey guys i just got an ar7000 for my 50 size heli well i was gunna bind it to my dx6i today using my blade 400 esc and lipo bat well when i plug in the bat the reciever light blinks once then shuts off....so i plug in my bind plug that came with my blade 400 im placing it on aux 1 i hold the trainer switch and turn on radio and it beeps binding but my reciever has no lights bliking what so ever em i doing this correct or is there another bind plug for this reciever? thanks!!

[marchambault]

The bind plug goes in the "batt" connector, your battery can be plugged into any other channel.

[sniper_iron_man]

some reason that doesnt work for example i have a blade 400 when i plug my bad into the reciever it starts blinking but when i try to put my bat on my ar7000 thousand it just blinks as soon and the bat touches the little plugs then there is no blinking is this alright?

[marchambault]

some reason that doesnt work for example i have a blade 400 when i plug my bad into the reciever it starts blinking but when i try to put my bat on my ar7000 thousand it just blinks as soon and the bat touches the little plugs then there is no blinking is this alright?

"when I plug my bad into the receiver"

The bind process is the same for the AR6100 as for the AR7000. Both receivers have a "batt" connector, for the AR7000 it is perpendicular to all the other servo connectors.

Are you sure you are using the correct pins for the bind plug?
Are you sure the polarity of your power source is correct? (Are you using a RX battery pack or a bec?)

http://www.spektrumrc.com/ProdInfo/Files/SPM6070_AR7000_Binding.pdf