AirmanBob
06-19-2008, 12:50 AM
If you are looking for a really terrific charger for Lipo's,
NiMh, Nicd, Life...
You should google the Venom Pro Charger and read
up on it.
I have one and I just love it. It charges my Lipo's a
lot faster too...and safely.
It comes with:
1. General charge cord...for Lipos etc.
2. Tamiya charge adaptor
3.Traxxas charge adaptor
4. JST charging adaptor
5. Reciever charge adapter
6. Glow ignitor charge adapter
7. Aligator clip charge adapter...charge your starter batts.
8. Cell Balance block..hooks your Lipo balance plug to charger.
9. Temperature probe
10. USB connector
It has its own power supply...It can also be hooked to your car batt.
In other words.. it's an AC/DC charger.
The LCD screen tells you how many MAH's you are putting back into
your Lipo's.
It shows charge status of each cell...you can watch it balance the cells.
(it has a built in balancer, no need to buy one)
You can set the number of cells...or it can figure it out for you (auto mode).
You can set the charge limits....You can set time llimits....
You can adjust the Delta peak on NiMH batts.
You can adjust the Delta peak on NiCD batts.
You can set capacity cut-off from 10mah to 9990mah.
It's easy to use too. And, its 2008 technology...Latest and greatest....
If you are looking for a charger at least give the Venom Pro Charger a look.
I do not sell r/c stuff...never have, never will. I'm just a very satisfied user
of a great product and you all should check it out...IMO...
Bob
Note on the second picture it is showing the voltage of each cell (in this case
a 3 cell lipo) as it balances them.
NiMh, Nicd, Life...
You should google the Venom Pro Charger and read
up on it.
I have one and I just love it. It charges my Lipo's a
lot faster too...and safely.
It comes with:
1. General charge cord...for Lipos etc.
2. Tamiya charge adaptor
3.Traxxas charge adaptor
4. JST charging adaptor
5. Reciever charge adapter
6. Glow ignitor charge adapter
7. Aligator clip charge adapter...charge your starter batts.
8. Cell Balance block..hooks your Lipo balance plug to charger.
9. Temperature probe
10. USB connector
It has its own power supply...It can also be hooked to your car batt.
In other words.. it's an AC/DC charger.
The LCD screen tells you how many MAH's you are putting back into
your Lipo's.
It shows charge status of each cell...you can watch it balance the cells.
(it has a built in balancer, no need to buy one)
You can set the number of cells...or it can figure it out for you (auto mode).
You can set the charge limits....You can set time llimits....
You can adjust the Delta peak on NiMH batts.
You can adjust the Delta peak on NiCD batts.
You can set capacity cut-off from 10mah to 9990mah.
It's easy to use too. And, its 2008 technology...Latest and greatest....
If you are looking for a charger at least give the Venom Pro Charger a look.
I do not sell r/c stuff...never have, never will. I'm just a very satisfied user
of a great product and you all should check it out...IMO...
Bob
Note on the second picture it is showing the voltage of each cell (in this case
a 3 cell lipo) as it balances them.