revolutionhobby
06-22-2008, 05:52 PM
I am selling my Trex 450 SE V2 complete and RTF. It
Equipment:
-Spectrum DX7 radio
-Futaba GY240 Gyro and digital tail servo
-Three Hitec HS-65 servos for swashplate
-Venom Power Lipo balancing charger
-Thunder Power 2100Mah 11.1v )20c) Lipo
-Thunder Power 2050 Mah 11.1v (25c) Lipo
-Align Aluminum Carrying case
-Custom painted Canopy
-Custom painted and detailed Augusta fuse (see below)
This was all professionally set up by the guys at Tammie's Hobbies in Beaverton, Oregon.
-stock Align motor
-stock align ESC
The heli is installed in an Align Augusta 109 fuse with a custom paint scheme and a custom lighting system. I have installed a simulated rotating beacon in the belly, two landing lights in the nose, three directional navigational lights (red on left side, green on right side, and blue on tail), and three functional strobes next to each nav light just like the real thing. These are powered with a separate 9v battery in the nose of the fuse since I needed the additional weight for balancing the fuse. We also did a custom paint scheme on this heli. We put a silver/aluminum base coat, a metallic blue stripe on the side that curves down to the belly with a silver pinstripe then an orange stripe on the tail boom that also curves down to the belly. We also painted all the rivets on the colored parts of the aircraft silver to match the base aluminum color.
Extras that come with this heli are as follows:
-All original parts to return to stock Trex 450 SE V2 (landing skids, boom supports, etc)
-Comes with two sets of Align Pro WOOD blades (one white one black)
-One set Carbon Fiber V Blades with Wood core
-Align Carbon Fiber Flybar paddles (real carbon not printed)
-Real Carbon Tail rotors
-Real Carbon standard tail set
_Real Carbon 3D Tail fin set
-Spare Carbon tail boom
-Spare full metal tail unit (purple anodized)
-one yard of double sticky back tape
-one foot of velcro mounting tape (hook and loop side and fuzzy side too)
-some long yellow cable ties
-some long white cable ties
-a bunch of short black cable ties
I am asking $1296 obo for everything. If interested email or call Matt at 503-737-9540
Equipment:
-Spectrum DX7 radio
-Futaba GY240 Gyro and digital tail servo
-Three Hitec HS-65 servos for swashplate
-Venom Power Lipo balancing charger
-Thunder Power 2100Mah 11.1v )20c) Lipo
-Thunder Power 2050 Mah 11.1v (25c) Lipo
-Align Aluminum Carrying case
-Custom painted Canopy
-Custom painted and detailed Augusta fuse (see below)
This was all professionally set up by the guys at Tammie's Hobbies in Beaverton, Oregon.
-stock Align motor
-stock align ESC
The heli is installed in an Align Augusta 109 fuse with a custom paint scheme and a custom lighting system. I have installed a simulated rotating beacon in the belly, two landing lights in the nose, three directional navigational lights (red on left side, green on right side, and blue on tail), and three functional strobes next to each nav light just like the real thing. These are powered with a separate 9v battery in the nose of the fuse since I needed the additional weight for balancing the fuse. We also did a custom paint scheme on this heli. We put a silver/aluminum base coat, a metallic blue stripe on the side that curves down to the belly with a silver pinstripe then an orange stripe on the tail boom that also curves down to the belly. We also painted all the rivets on the colored parts of the aircraft silver to match the base aluminum color.
Extras that come with this heli are as follows:
-All original parts to return to stock Trex 450 SE V2 (landing skids, boom supports, etc)
-Comes with two sets of Align Pro WOOD blades (one white one black)
-One set Carbon Fiber V Blades with Wood core
-Align Carbon Fiber Flybar paddles (real carbon not printed)
-Real Carbon Tail rotors
-Real Carbon standard tail set
_Real Carbon 3D Tail fin set
-Spare Carbon tail boom
-Spare full metal tail unit (purple anodized)
-one yard of double sticky back tape
-one foot of velcro mounting tape (hook and loop side and fuzzy side too)
-some long yellow cable ties
-some long white cable ties
-a bunch of short black cable ties
I am asking $1296 obo for everything. If interested email or call Matt at 503-737-9540