Ed1955
06-24-2008, 10:04 AM
Can anyone explain how to set up a 9303 to a DX7 in the radios? I will be primary flying with the DX7 and have a buddy using his 9303 to save my butt. Any and all help will be greatly appreciated because I've heard that there are two different ways of doing it.
Respectfully,
Ed
Hughes500Bob
06-27-2008, 01:58 PM
Normal = mode Both TXs must have matching programming. You can then pass full control back and forth (sticks and switches.)
P-Link = Master has all control of secondary non-stick functions (switches) and only stick control is transfered to the Slave when the trainer button is switched. Your DX7 as Master and his 9303 as slave. This is how I suspect you will do it! :thumbup:
Slave/P-Link = You could be a Slave to some other Spektrum radio as Master.
Connect patch cord to Master (It will turn Display ON) connect patch cord to Slave (It will turn Display ON). Then turn ON the MASTER. Do not turn ON the Slave radio.