Upgrade motors for gaui

[Sirwallis]

ive been searching the Internet for alternative motors for the gaui and i was wondering what other people had come up with so far. (other than the "Z POWER") im also curious about what kind of weight increase is reasonable when replacing the motor so if you know what your replacement motor weighs and if you noticed a difference. and what kind of power increase. thanks

[Jetleaf]

I've not seen any other than z-power. You would think there would be more options for the 200. But you would also think we could get cf blades.

[Sirwallis]

yeah the only motors i have found have just happend to fit the spec's, nothing advertised specifically for the 200. i emailed JGF and they recommended the 400.. that would be cool and it would fit but its twice the weight of the stock motor and not exactly cheap either. i thought some one on here was using an AON motor? i tried looking for somthing from them but apparently they merged with cermark. now it looks like nobodys carrying there stuff... anyway if any ones tried somthing different or even if you have a good experience with the z power let me know.

Thanks

[Jetleaf]

My zpower is awesome with the stock esc on 2s. I've tached 4520 at 87.5% throttle and no vibration and for only $22. Ya can't beat that. I'm going to get another one for the other bird.

[t-driver]

yeah the only motors i have found have just happend to fit the spec's, nothing advertised specifically for the 200. i emailed JGF and they recommended the 400.. that would be cool and it would fit but its twice the weight of the stock motor and not exactly cheap either. i thought some one on here was using an AON motor? i tried looking for somthing from them but apparently they merged with cermark. now it looks like nobodys carrying there stuff... anyway if any ones tried somthing different or even if you have a good experience with the z power let me know.

Thanks

i have the aon 3800 motor. it's very powerful with long flight times (11.5Min) but on 3S.

it is called eh-100 pro, or eh-100 gt now. both are the same
and they are NOT a direct fit. the holes on the frame need some grinding.
http://www.elemodel.com/shopen/html/product_1381.html
http://www.elemodel.com/shopen/html/product_1329.html

there is also the eh-100 V2 which is the same motor without the fan and cheaper. (had one in my walkera 64C)
http://www.elemodel.com/shopen/html/product_1335.html

[Sirwallis]

Thanks for the info guys, jetleaf what Kv motor are you running?

[Jetleaf]

It's the 5150 on 2s and the stock esc