Tintin
06-29-2008, 06:16 PM
I'm having problems in calibrating my RevMax after I switched to a JR DSX9.
I just cannot seem to get into calibrating mode. It's connected to ch8/aux3 and that channel is controlled by the flap/aux2 switch so that I can have 2 different settings/rpms like it's described in page 3 of the manual. This worked just fine on my 9XII.
I transferred all the settings from my 9XII so they are identical on the DSX9.
If I move the aux cable to ch 5 and use the gear switch or try manual calibration all is well. However for some reason I cannot calibrate with it in ch 5 and then move it to 8 to use it, and no matter how I flick the flap switch(ch8) I cannot get it to enter calibr mode.. I've checked the signal coming from ch 8 with a servo and it's working just fine. ATV is at 100% on both thr and aux3/ch8 as per manual. Movement is fine with the checked servo and on the monitor screen it's identical to that of the gear channel (which I can use to get into calibr mode), well if you flick fast that is as the flap switch has 3 positions compared to the gear channels 2.
Can anyone tell me what I'm overlooking here?
I just cannot seem to get into calibrating mode. It's connected to ch8/aux3 and that channel is controlled by the flap/aux2 switch so that I can have 2 different settings/rpms like it's described in page 3 of the manual. This worked just fine on my 9XII.
I transferred all the settings from my 9XII so they are identical on the DSX9.
If I move the aux cable to ch 5 and use the gear switch or try manual calibration all is well. However for some reason I cannot calibrate with it in ch 5 and then move it to 8 to use it, and no matter how I flick the flap switch(ch8) I cannot get it to enter calibr mode.. I've checked the signal coming from ch 8 with a servo and it's working just fine. ATV is at 100% on both thr and aux3/ch8 as per manual. Movement is fine with the checked servo and on the monitor screen it's identical to that of the gear channel (which I can use to get into calibr mode), well if you flick fast that is as the flap switch has 3 positions compared to the gear channels 2.
Can anyone tell me what I'm overlooking here?