Help Futaba 502 Gyro

[worldwidechauffeur]

How do I adjust Futaba Gryo 502 so the slider on the Tail Rotor Shaft
does not go over to one side to far and hit at the end point ?

Iam using a Futaba 9c Transmitter

[forjer]

Do you mean 401? If so there's a limit pot on the gyro that you can adjust with the non-conductive plastic screwdriver that it came with.

[DavidH]

Access the menu on the Gyro.
Scroll thru the menu to Lmt ( Limit), It will be LmtA or B. A and B is the adjustment for either direction.
http://manuals.hobbico.com/fut/futm0813-manual.pdf

Push the rudder stick to the left and adjust the travel for that direction, then push the stick to the right and adjust the travel for that direction.

Be sure to exit the menu and get back to the home screen before you fly the model. The gyro is inhibited when in the menu and will not work.

David

[Helirat]

On the futaba 502 go into the setup screen and look for LmtA100%.
when you move the stick to the left you will see the A will change to B.
these are your rudder servo travel limits for left rudder and right rudder use the +and - key
to set the limits for both sides :thumbup: