IT MOVES TO THE RIGHT

[Cym]

On hover (MT 325SE) it tends to move to the right, not turning but drifting to the right. Should I adjust the swash slightly to the left on the servo link? Not much maybe one complete turn.
Newbe trying to trim out a Heli :) :)
BTW the swash is leved by Youngblood Leveler, works good.
If there is a beter or easyer way tell me.
Thanks.

[rotorhead58d]

try using the radio trim

[Cym]

I opted to adjust the servo linkage, it also leveled the swash more accurately.
Test flight next :)

[paintballkidz]

A swash plate leveling tool would be useful.

[Cym]

TRUEBLOOD LEVELER all the way.

[rotorhead58d]

just set up the head the right way. you don't really need a swash leveler.

[Cym]

The right way could be catawampus way.