View Full Version : T-rex 450 SE Problem
Pipes
06-30-2008, 05:42 PM
I just changed the Main Shaft and the Tail boom from Crashing. I think I put every thing back the way is was. But now when I spool up at 3/4 Throttle is does lift off the ground, Can someone help me.
Thanks Newbie
Pipes
06-30-2008, 06:43 PM
Can't send photos , maybe blades need to be guaged?
Thanks
Just post photos on photobucket or something. Its hard to tell whats wrong with a setup without being able to look at it.
Skiddz
06-30-2008, 11:59 PM
Mainshaft in the right way? There's a difference in the distance between the "jesus bolt" holes and the ends of the shaft.. If memory serves, the shorter distance between the bolt hole and the end of the shaft goes down.
TheBum
07-01-2008, 08:26 AM
Mainshaft in the right way? There's a difference in the distance between the "jesus bolt" holes and the ends of the shaft.. If memory serves, the shorter distance between the bolt hole and the end of the shaft goes down.
An easier way for me is to make sure the circular "notch" on the main shaft lines up with the collar.