Help!

[7wt]

I just got my Reflex installed on my Mac and it works just fine as far as the software goes but the heli flies like poo. The controls are mixed, when I give it collective it rolls forward and to the right as well as climbs. I went through all the stick adjustments like it prompted me to several times but it still tells me that one or more functions are on the same channel. Anyone have any idea how to fix it?

[catfight]

7wt,

What tx are you using? You need to setup a new model profile in the tx with PPM settings to have XTR understand it- it will not work correctly if you are using eccmp settings. I found this out the hard way :0). Just a guess - hope this helps :0)

[7wt]

I am using a X9303. I will jank with the swash settings when I get home. I know I have the 120 set in there now. Thanks.

[7wt]

OK so now I have another problem. I went to the one servo set up on the head and it works just fine but I can't seem to get any negative pitch for autos or inverted flight. I know oncew I get the thing set up I will be happy with the sim but it is frustrating now. Any suggestions?

[catfight]

7wt,

You probably need to setup your tx with a switch for (stunt) mode1 to allow + and - on the collective. You must be only in "normal" mode now.

Cheers

[7wt]

Thanks Rusty. I can hit the idle up switch and the thing will climb but it's because increased rotor speed. I am software challenged and I can't fly to save my life (hence the sim). I plan on going by the LHS and asking them to help sort it out for me.

[catfight]

7wt.

Here is my xtr setup using JR 6102. Note the pluses and minuses to the right of the button assignments. This is not a model in your tx of course :0)

[7wt]

THANK YOU!!!

That did the trick. I appreciate all our help.