adelmasw
07-01-2008, 09:57 AM
Contact me at: sadelman@woh.rr.com (PLEASE do not PM). I don’t check the web site that often.
I am selling an ION-X2. Never crashed. This was an ION-X and I converted it to an X2. Updated fly-bar cage, New motor and ESC, Canopy has a really bad paint job. Flown about 15 times since installing new motor and ESC. Batteries have been used about the same and never below 80%. Ready to fly – just bind to your TX and set up.
V2 Carbon Tail and Main Blades
Gyro: Futaba GY 601, S9251
Servos: S9252 x 3
Motor: Actro 32-3 (I think the ratio is about 9.5)
ESC: Castle Creations 110HV with Castle Link programmer, USB cord
RX: Spectrum AR7000
BEC: Dimension Engineering VHVBEC, 5V/6V selectable
Spectrum Data Logger, Converted Fly-bar cage, Tail rotor box – closed gear style
Batteries (3): Always charged and balanced on TP1010C, TP210V (Charger and balancer not included)
1: Thunder Power Extreme V2 5000MAH 10S (Brick), Deans
2: Flight Power EVO 25 5000 5S x 2, series connector, Deans
3: Flight Power EVO 25 5000 5S x 2, series connector, Deans
Additional:
Blade holder
Extra Motor, ESC, Programmer, gears and belt:
Hacker C50-XL, 77-0-Heli ESC, Master Prog-Box, two gears, belt, instructions. Motor just came back from Hacker and bearing was replaced.
Tail Rotor Blades: Plastic: two sets, one new, one used, 95mm; SAB: new 95mm
Build books
A few spare parts
Price: $3,500, + $50 shipping. Do not want to part out. Pay by Paypal. Shipped only to continental US. No international sales.
Contact me at: sadelman@woh.rr.com (PLEASE do not PM). I don’t check the web site that often.
Pictures: Don’t have right now. I can e-mail if you are interested.
I am selling an ION-X2. Never crashed. This was an ION-X and I converted it to an X2. Updated fly-bar cage, New motor and ESC, Canopy has a really bad paint job. Flown about 15 times since installing new motor and ESC. Batteries have been used about the same and never below 80%. Ready to fly – just bind to your TX and set up.
V2 Carbon Tail and Main Blades
Gyro: Futaba GY 601, S9251
Servos: S9252 x 3
Motor: Actro 32-3 (I think the ratio is about 9.5)
ESC: Castle Creations 110HV with Castle Link programmer, USB cord
RX: Spectrum AR7000
BEC: Dimension Engineering VHVBEC, 5V/6V selectable
Spectrum Data Logger, Converted Fly-bar cage, Tail rotor box – closed gear style
Batteries (3): Always charged and balanced on TP1010C, TP210V (Charger and balancer not included)
1: Thunder Power Extreme V2 5000MAH 10S (Brick), Deans
2: Flight Power EVO 25 5000 5S x 2, series connector, Deans
3: Flight Power EVO 25 5000 5S x 2, series connector, Deans
Additional:
Blade holder
Extra Motor, ESC, Programmer, gears and belt:
Hacker C50-XL, 77-0-Heli ESC, Master Prog-Box, two gears, belt, instructions. Motor just came back from Hacker and bearing was replaced.
Tail Rotor Blades: Plastic: two sets, one new, one used, 95mm; SAB: new 95mm
Build books
A few spare parts
Price: $3,500, + $50 shipping. Do not want to part out. Pay by Paypal. Shipped only to continental US. No international sales.
Contact me at: sadelman@woh.rr.com (PLEASE do not PM). I don’t check the web site that often.
Pictures: Don’t have right now. I can e-mail if you are interested.