View Full Version : Fried Mini Titan Motor, whats a good replacement
earetz
07-02-2008, 04:24 AM
Hi Guys. Fried the Mini Titan motor today and was wondering what is a good replacement. I'm not overly impressed with the life from this one, probably has done less than 60-70 flights, so an aftermarket may be the way to go? I dont want anything over the top, mid range. Any suggestions would be appreciated. Many Thanks Ed.
Tim Tompkins
07-02-2008, 09:16 AM
I love my new Zpower Z10-A 3700. It is my favorite. I have a buddy that has the 3300 but the 3700kv is what the SE uses for higher head speed. They use a different motor stock but for a few $ more I would recommend the Z motors. I got mine from Helidirect as a Toni X but you can find them with different names. TimT
greg006
07-03-2008, 10:22 PM
how many minutes flying can u get using this motor compared to the origional TT motor
paintballkidz
07-03-2008, 11:04 PM
Scorpion 2221-8,
-6 if you want more punch but you'll need a metal head.
Tim Tompkins
07-04-2008, 07:20 AM
I changed my timer to go off after 5 mins now. I used to go 6 but I think it's more because I can fly harder with the new motor so I do. I have a bunch of Kong powers and I don't worry about running them down too far. When they start to loose pop I feel it's time to land. TimT
earetz
07-04-2008, 09:24 AM
Thanks for all your posts, I'm going to go with the Z10-A 3700 and run it on a 4s. Many Thanks Ed.
If you are just sport flying the Scorpion 2216-12 is a good compromize of long run time and adequate power. If you have advanced to 3D then I would agree with Paintballkidz on the Scorpion 2221-8.