aluminum rotor heads

[Raptorman37]

which aluminum headblock do you guys think is good, ive heard that thundertiger's stuff can be machined poorly? thanks

[BarracudaHockey]

Depends on what you're after.

If you want to upgrade the flight characteristics then Kasama or G-Force

If you just want something thats going to last longer than the plastic head then
QuickUK is the nicest followed by Mavrikk and Thunder Tiger which are both adaqueate.

[Raptorman37]

what about the Top Dragon head?

[BarracudaHockey]

Same as the mavrikk

http://www.rcuniverse.com/magazine/article_display.cfm?article_id=860

[Raptorman37]

ok G-force it is, hey do you have any experience with the infinivation dampers? If so you like them?

[BarracudaHockey]

Yep, good stuff. But they were too stiff for my Kasama head, it would wobble during autos, so I went back to red.

[Raptorman37]

For our anniversary, my wife is getting me a stretch kit for my 30V2, is the Titan really that much better than a 50V2?

[BarracudaHockey]

The main difference is that it can swing bigger blades, you can get the boom, belt and rudder linkage if you really want to. FWIW I run 600mm blades on my Titan, they are snappier than 620s. 620s are a bit smoother and auto a tad better.

[Raptorman37]

yeah, I would think the 600's would be snappier Smaller blade= Easier to spin and keep spinning. I'll just buy the push pull elevator and all that separate.

Thanks for your advice Andy i really appreciate, your a really cool guy.