cryhavoc38
07-03-2008, 01:22 PM
SOLD
Picked this up new in the box about two weeks ago and started to put it together. The Huri 550's come pretty much 90% assembled so basically I installed the boom, installed my servo's and have been working on the linkages.
Well I just got my TREX 600N Pro and will be focusing on that and since I already have a TREX 500 the Gaui will be sitting on the shelf for awhile.
So I'm going to offer it up for sale. Everything is new and details are below.
Gaui 550 CFS Carbon Side Frame version with CNC upgrades that come stock
Scorpion 3026-1400kv Heli motor. Bought this last week for this Gaui and its new
3 DS-821 Spektrum Digital servo's installed for the swash with the Custom Heli Parts Carbon Fiber Servo Double Arms with the proper offset for the Hurricane 550. No need to drill offsets into the servo arms. These carbon fiber offsets are already installed on the spektrum horns.
Stock plastic tail blades are included.
No esc, tail servo or Gyro included.
The kit does not come with main blades either.
This is the shorter tail boom version. You can use 550mm blades that are standard for the longer boom version, but ideally, 500 to 525mm blades should be used.
The canopy is the stock white version and comes with two sheets of stickers.
The manual is included as well.
The servo's were from a DX7 kit a local dealer had parted out but are new.
Add your tail control setup, esc and your receiver and you will be flying within a few hours.
Price shipped to CONUS destinations only is $400
The heli alone goes for $399 at readyheli and other places. You get a new heli, new Scorpion motor and three new DS821 servo's!!! :)
$325 without the Scorpion motor if you don't need it.
Paypal preferred with no fee to the buyer.
PM me with your interest.
Just as a reminder, the receiver, tail servo, gyro, and esc are not included. I will include the new Thunder Tiger 550 woodies with the sale.
Chuck
SOLD
Picked this up new in the box about two weeks ago and started to put it together. The Huri 550's come pretty much 90% assembled so basically I installed the boom, installed my servo's and have been working on the linkages.
Well I just got my TREX 600N Pro and will be focusing on that and since I already have a TREX 500 the Gaui will be sitting on the shelf for awhile.
So I'm going to offer it up for sale. Everything is new and details are below.
Gaui 550 CFS Carbon Side Frame version with CNC upgrades that come stock
Scorpion 3026-1400kv Heli motor. Bought this last week for this Gaui and its new
3 DS-821 Spektrum Digital servo's installed for the swash with the Custom Heli Parts Carbon Fiber Servo Double Arms with the proper offset for the Hurricane 550. No need to drill offsets into the servo arms. These carbon fiber offsets are already installed on the spektrum horns.
Stock plastic tail blades are included.
No esc, tail servo or Gyro included.
The kit does not come with main blades either.
This is the shorter tail boom version. You can use 550mm blades that are standard for the longer boom version, but ideally, 500 to 525mm blades should be used.
The canopy is the stock white version and comes with two sheets of stickers.
The manual is included as well.
The servo's were from a DX7 kit a local dealer had parted out but are new.
Add your tail control setup, esc and your receiver and you will be flying within a few hours.
Price shipped to CONUS destinations only is $400
The heli alone goes for $399 at readyheli and other places. You get a new heli, new Scorpion motor and three new DS821 servo's!!! :)
$325 without the Scorpion motor if you don't need it.
Paypal preferred with no fee to the buyer.
PM me with your interest.
Just as a reminder, the receiver, tail servo, gyro, and esc are not included. I will include the new Thunder Tiger 550 woodies with the sale.
Chuck
SOLD