ShokWaveRider
07-04-2008, 08:38 AM
I am getting out of the hobby. (Just bought a new house, no time for it, one must go, the RC Heli lost the battle)
This heli is a REAL V2, it has NEVER been Outside, always flown indoors and no more than 10ft off the ground and never 3D'd! It has always had training floats installed (Pool Noodles) with elastic bands to the skids. The skids have NEVER touched the ground. I would say it has about 5 hours of light use on it. It is PERFECTLY Balanced and set up. Again, it is like BRAND NEW but fully Assembled.
I am in St. Augustine Florida and would prefer a pickup, but shipping is no problem.
Here is what it is:
1 - 2008 Model V2 450 SE Silver Carbon Fiber, the original carbon fiber Blades and Canopy were NEVER installed and are brand new. There is not a scratch on it.
2 - Original Carbon Fiber Blades (NEW)
3 - Original V2 Canopy unused with NEW uninstalled Decals
4 - Spare set of 225 Blades lightly used
5 - 2 DS285 MG Digital Servos on Right Cyclic and Pitch
6 - 2 DS285 Digital Servo on Left Cyclic
7 - 1 DS3400G Digital Servo on Tail Rotor
8 - 430XL BL Motor
9 - BL35X Speed Controller (ESC)
10- Spektrum AR6100 Receiver
11- Spare set of Tail Rotors (NEW)
12- Spare Fly Bars (NEW)
13- Small Silver Case (Kit Came in)
14- Large Travel Carrying Case (New Foam Inserts not cut)
15- Spare Wide Landing Gear
16- 2 Near New 2200mah 30c Lipos
17- LOGITEC LTG-2100T Digital Gyro
18- Numerous small unused spare parts. (NEW, Never needed them)
19- Spare Pool Noodle Float Set
20- Spare Main Gear Assembly (NEW)
21- Spare Tail rotor belt (NEW)
22- Align Blade Balancer
AirFrame Only, includes, Large Carrying Case (For Shipping), Motor, ESC, 1 30c 2200mah Lipo, Blade Balancer, Wide & Regular Landing Gear, All Spare Parts, Main Gear, New Unused Carbon Blades, New Unused Canopy, Tail Rotors, Flybars, Belt, etc.
$500 + Shipping & Insurance
Please remember, the Airframe, Motor, ESC, 2 Blade sets, spare tail rotors, general spares, Canopy & Large Case all go together as one.
I will sell the lot for $650 + Shipping and Insurance. Worth $1300 for all these bits new.
Additional Close Ups Photos are available on request.
Thanks
SWR
If you want to call me I will post my Phone number in a PM, or you can give me yours and I will call you.
This heli is a REAL V2, it has NEVER been Outside, always flown indoors and no more than 10ft off the ground and never 3D'd! It has always had training floats installed (Pool Noodles) with elastic bands to the skids. The skids have NEVER touched the ground. I would say it has about 5 hours of light use on it. It is PERFECTLY Balanced and set up. Again, it is like BRAND NEW but fully Assembled.
I am in St. Augustine Florida and would prefer a pickup, but shipping is no problem.
Here is what it is:
1 - 2008 Model V2 450 SE Silver Carbon Fiber, the original carbon fiber Blades and Canopy were NEVER installed and are brand new. There is not a scratch on it.
2 - Original Carbon Fiber Blades (NEW)
3 - Original V2 Canopy unused with NEW uninstalled Decals
4 - Spare set of 225 Blades lightly used
5 - 2 DS285 MG Digital Servos on Right Cyclic and Pitch
6 - 2 DS285 Digital Servo on Left Cyclic
7 - 1 DS3400G Digital Servo on Tail Rotor
8 - 430XL BL Motor
9 - BL35X Speed Controller (ESC)
10- Spektrum AR6100 Receiver
11- Spare set of Tail Rotors (NEW)
12- Spare Fly Bars (NEW)
13- Small Silver Case (Kit Came in)
14- Large Travel Carrying Case (New Foam Inserts not cut)
15- Spare Wide Landing Gear
16- 2 Near New 2200mah 30c Lipos
17- LOGITEC LTG-2100T Digital Gyro
18- Numerous small unused spare parts. (NEW, Never needed them)
19- Spare Pool Noodle Float Set
20- Spare Main Gear Assembly (NEW)
21- Spare Tail rotor belt (NEW)
22- Align Blade Balancer
AirFrame Only, includes, Large Carrying Case (For Shipping), Motor, ESC, 1 30c 2200mah Lipo, Blade Balancer, Wide & Regular Landing Gear, All Spare Parts, Main Gear, New Unused Carbon Blades, New Unused Canopy, Tail Rotors, Flybars, Belt, etc.
$500 + Shipping & Insurance
Please remember, the Airframe, Motor, ESC, 2 Blade sets, spare tail rotors, general spares, Canopy & Large Case all go together as one.
I will sell the lot for $650 + Shipping and Insurance. Worth $1300 for all these bits new.
Additional Close Ups Photos are available on request.
Thanks
SWR
If you want to call me I will post my Phone number in a PM, or you can give me yours and I will call you.