View Full Version : 9303 linear throtte curve
21knots
07-07-2008, 10:51 PM
New radio..
I'm programming the ESC per Bob's vids, stating that I must first have a linear throttle curve.
This was the default setting, why does the IN = 1 and the OUT = -15?
still hunting thru posts, thanks a million guys--
Dan
rl_sexton
07-07-2008, 11:48 PM
The -15 is the throttle trim. Move the trim and you will see it change. If you go to st-1 or st-2 its not there.
21knots
07-08-2008, 01:02 PM
ahhh..
So when I program the ESC I leave it at -15?
marchambault
07-09-2008, 12:25 AM
leave the throttle trim at 0 for electrics
21knots
07-09-2008, 12:16 PM
OK, thanks guys.
My only experience with a radio has been with a Walkera combo-- the throttle trim has to be all the way down all the time.
marchambault
07-10-2008, 09:37 PM
When you program a new ESC, it will learn the 100% and 0% positions of your transmitter.
21knots
07-11-2008, 12:23 PM
When you program a new ESC, it will learn the 100% and 0% positions of your transmitter.
Thanks bro:thumbup: