Trex 700 count

[stmpngrnd]

Just for fun lets start a count of who has their 700 and what their setup is. Only rule is you HAVE to actually have a kit or a tracking number for you order/per order...no wishlist setups here please. Let the fun begin :):):):):):) and post pictures if you got them.

Count #1(pictures coming soon)
trex 700 (just picked up at the PO BOX..build starts after work!)
OS 91..have been breaking it in on my Fury and another tank or two and it will be ready
MPII
Radix 690(sweet deal on some blems;)) and 710 rotortech
cyclic 9452
tail 9254
jrg500t
ar7
multigov pro ... have been testing this on my 600 and I am blown away impressed
hs-65mg on both mixture and throttle
align 2 in 1 reg

[cbdane]

#2. Hopefully mine is on the way. Impulse buy; don't ask. I'm on travel now and just beginning to think about and shop for the rest of the build.

[Helirob]

#3 - Got mine last week from DeeTee Enterprises

YS91
Hatori SB19
8717's
Spartan Gyro
690 V-Blades
AR7100R reciever, governor and regulator

Fly's amazingly well. Feels really light in the air, great tracking at high speed, lot's of collective travel for those popping tricks, mind blowing 3D ability. I'm very happy with the helicopter, in fact, it's the best flying heli I have owned so far.

Good times :)

[Locktite]

#4--Will be here this week..Shipped Priority mail from Assurance Tuesday

YS .91SR
Hatori SB19 pipe
8717's
Spartan Gyro (may switch to a Solid-G if need be)
710 Radix
AR7100R

http://i149.photobucket.com/albums/s65/Locktite116/IMG_1173.jpg

[p00rboi]

#5 Picked mine up from a not so LHS on 07/03.

YS91SR
Spartan DS760
710 Radix/680 V-Blades

Still need servos, receiver and pipe.

[Dflyer]

#6 700 on the way

OS 91 SZ
Hatori 938
Radix 710 SB
3 x Hitec 6975 on cyclic
GY 601 + S9251
S3152 on throttle
Carbsmart
Arizona Regulator

Grtz,
Dirk

[ALEC]

#7

this is not a wish list the min i can get the kit i will the cash is on one side come on ready
heli i want my 700 kit and 4x 8717.

what ive got
ys 91 sr
hatori sb19
ar 9000
radix 690
atg
gy611 +bls 251

[Finless]

Well you all know I have one... So I guess I am in the count.....

Bob

[sonofcar]

Mine will be here friday depending on the fedex guy

Os 91szh pumped
hatori sb18fh
ar7100r
8717x3
8900gx2
solid g
radix690
my simple set up will be max cylic 14 pitch 1950 headspeed....i cant wait

[derelict]

Building it right now in front of me ;-)

Setup:

- Futaba fasst R608 (running on 5v)
- 8717 on cyclic running on regulated 7V (using reactorX regulator)
- 9254 running on 5v for throttle
- multigov pro
- reactorX regulator (7v for cyclic / 5v rx,rudder,throttle,carbsmart,gyro)
- Spartan Gyro with jr 8900g
- Flightpower 4000mah pack
- radix 690 blades
- radix super stubz 4mm paddles
- ys 91 sr with hatori sb-19 pipe
- hs-55 mixture servo
- switchglow 6v
- westernrobotics lipo alarm with buzzer

Greets

Marcel

[JodyJ]

I picked mine up a few days ago and started the build today :) I am however having problems with the tail assembly. One of the tail grips is not smooth or I should say it's smooth, but doesn't move freely like the other side. Also the (I'll call it) the bracket that attaches to the pitch slider and then the tail grip is fairly tight, it doesn't move freely like my 600's or 500's. Going to Assurance tomorrow morning to see if they can help out.

Big thanks for Bob for taking my call tonight, but I had to cut it short to put the kids to bed.

BTW, has anyone tried using the sensor that mounts to the backing plate from the Spektrum receiver with the ATG? I've read that it see's the sensor position, but have not heard people actually using it. I'll be using it this way and see's what happens :)

[toaster12]

Got mine yesterday!

os91 sz pumped
Hatori SB18
AR9000
SG ReactorX
BLS451's
Spartan DS760/8900G
Rotortech 690's

Hope fully Maiden tomorrow, if the weather holds!

[ALEC]

in the post monday or tuesday when my 4x 8717 servos turn up,thanks grand rc:) x

i will post picks when ive finished the build!!!


4x jr 8717
gy611+bls251
atg
ar9000
radix 690
ys 91 sr
hatori sb19fs

[PacketSpike]

Order in the Mail - second kit in my LHS next week, have to wait for the first..

T-Rex 700 x 2 kits (Yeah I know Greedy sorry but I know I am going to crash sooner or later)
SWE-710CT Main Blades

Radix 105 T/R
3 x JR DS8717
1 X DS821 (for throttle, opinions accepted...)
Carbsmart with HS-55 servo
AR7100
GY611 w/S9256

OS 91 SZ-H Pumped
Hatori SB-18FH

Align B6T 2 In 1 Voltage Regulator+1900mA Lipo combo

I will take pics...

SOOOO EXCITED I'm 5 Years old again ;-)

[assatom]

Two kits shipped to me, will have them next week !!
4x JR8717
spartan 760 w/JR 8900
Radix 710 SB
Radix 105
Align govenor/GV1
AR7100R
OS 91 SZ-H PH
++++++

[PacketSpike]

Two kits shipped to me, will have them next week !!

Nice ;-) :thumbup:

[stmpngrnd]

Count #1(pictures coming soon)
trex 700 (just picked up at the PO BOX..build starts after work!)
OS 91..have been breaking it in on my Fury and another tank or two and it will be ready
MPII
Radix 690(sweet deal on some blems;)) and 710 rotortech
cyclic 9452
tail 9254
jrg500t
ar7
multigov pro ... have been testing this on my 600 and I am blown away impressed
hs-65mg on mixture
align 2 in 1 reg

15 flights and purring like a kitten!

[ganty]

hi all i have mine one :happyd

ys 91 st engine
gy 611 with 9256
3x 9255
Align B6T 2 In 1 Voltage Regulator
hatori 937

[Arcus 4]

Mine should be here tomorrow.

YS 91SR
Hatori SB-19FS
Logitec 6100 w/servo
JR R921
Hitec HS-5985 x 3 @ 6 volts (swash)
Arizona regulator w/lipo
Radix 710

[djzn]

:smokin::YeaBaby::thumbup::YeaBaby::rolling:lol: i love it

[CoronaL]

hi all i have mine one :happyd

ys 91 st engine
gy 611 with 9256
3x 9255
Align B6T 2 In 1 Voltage Regulator
hatori 937
how does the ys 91st work in the rex700
that is what I plan to run

[george0079]

just finished mine...

What an awesome build. Thanks for the vids Bob.

[PacketSpike]

I will get all the parts and 1 kit monday!!!!!!!!!

Whooo!

Cant wait, im 5 again.

[heliwoodster]

Found mine in the local hobby shop hidden behind the boxes think someone had put it there (hidden it) to late now ive got it ha ha £475 ,see if i can get the rest of the parts cheap from 3d masters ?.

[derelict]

anyone with an ys 91 sr finished the build yet ? how did you get enough clearance between the fuel line coming out of the main tank and the back of the motor ?

Marcel