rotorpsyco
11-09-2005, 07:53 AM
Sold Pending Funds
well I'm putting my pride and joy on the chopping block, it was built by Cforcht and flown by him before I aquired it, scince I aquired it I went through it and put a few of my personal touches on it, I went through and polished 99% of the aluminum on the heli, just about anything that was natural aluminum was polished, aluminum head, frames Red anodized Cforcht tail, aluminum polished fins, fin mounts, Quick UK tail servo mount, Red anodized boom, C/F boom supports, (boom support brace was removed and installed on another ship), C/F lower frame brace, red Quick UK header tank, blue QUK washout assembly, Red QUK swash and L arms, lowrider black tough struts, polished alum flybar hoops, machined aluminum driven tail assembly, QUK red alum forward belt pulleys, QUK blue tail pulley, QUK blue tail drive cog and shaft, QUK red tailhub, TT blue tail yoke, QUK red horz fin mount, QUK alum tail rotor actuator lever, new clutch (3 flights) Red alum T fuel filter, Raptor 60 fuel tank, polished spiral machined headbutton QUK red alum fan (just disclosing all the flaws here, my big fat fumble fingers dropped the alum fan before I installed it and put a small ding in one of the cooling fan blades, I checked the balance and it was still spot on....its 3 flights old) I've flown the heli thrice (3X) the first two were test and tune the last was to flip it inverted and pull a hover....it did just fine. awesome flying ship, no slop perfect looks, I have not mounted a canopy yet and will include the standoffs to do the four post mount (two are the polished machined stock type) the other two are freya I never got the chance to set up the can this way so it still needs done. all the QUK gear is 3 flights old
$1000 no electronics engine or pipe or blades standard bleach bottle canopy
$1220 with 3 flight old OS .50 and polished MP2Q,standard bleach bottle canopy
$110 a freshly pro painted House of Kolor Elektric blue over Krimson Burst and a punisher skull airbrushed in the windscreen. the silver band around the windscreen has rivits airbrushed in with a yellow pinstripe splitting the two colors. never flown or mounted. If custom canopy is bought I'll keep the bleach bottle can.
I'm not a fan of PP if you choose to use it please be prepaired to pay the requisite fee or I will accept postal money orders. shipping is split down the middle @ $15 and it WILL be insured and tracked with a signature confirmation
I dont need to sell it, I just never fly it and want to get some scale ships done
pics are on RR
http://runryder.com/helicopter/t213699p1/
or email for some pics
I dont have any references here but do at RR.
well I'm putting my pride and joy on the chopping block, it was built by Cforcht and flown by him before I aquired it, scince I aquired it I went through it and put a few of my personal touches on it, I went through and polished 99% of the aluminum on the heli, just about anything that was natural aluminum was polished, aluminum head, frames Red anodized Cforcht tail, aluminum polished fins, fin mounts, Quick UK tail servo mount, Red anodized boom, C/F boom supports, (boom support brace was removed and installed on another ship), C/F lower frame brace, red Quick UK header tank, blue QUK washout assembly, Red QUK swash and L arms, lowrider black tough struts, polished alum flybar hoops, machined aluminum driven tail assembly, QUK red alum forward belt pulleys, QUK blue tail pulley, QUK blue tail drive cog and shaft, QUK red tailhub, TT blue tail yoke, QUK red horz fin mount, QUK alum tail rotor actuator lever, new clutch (3 flights) Red alum T fuel filter, Raptor 60 fuel tank, polished spiral machined headbutton QUK red alum fan (just disclosing all the flaws here, my big fat fumble fingers dropped the alum fan before I installed it and put a small ding in one of the cooling fan blades, I checked the balance and it was still spot on....its 3 flights old) I've flown the heli thrice (3X) the first two were test and tune the last was to flip it inverted and pull a hover....it did just fine. awesome flying ship, no slop perfect looks, I have not mounted a canopy yet and will include the standoffs to do the four post mount (two are the polished machined stock type) the other two are freya I never got the chance to set up the can this way so it still needs done. all the QUK gear is 3 flights old
$1000 no electronics engine or pipe or blades standard bleach bottle canopy
$1220 with 3 flight old OS .50 and polished MP2Q,standard bleach bottle canopy
$110 a freshly pro painted House of Kolor Elektric blue over Krimson Burst and a punisher skull airbrushed in the windscreen. the silver band around the windscreen has rivits airbrushed in with a yellow pinstripe splitting the two colors. never flown or mounted. If custom canopy is bought I'll keep the bleach bottle can.
I'm not a fan of PP if you choose to use it please be prepaired to pay the requisite fee or I will accept postal money orders. shipping is split down the middle @ $15 and it WILL be insured and tracked with a signature confirmation
I dont need to sell it, I just never fly it and want to get some scale ships done
pics are on RR
http://runryder.com/helicopter/t213699p1/
or email for some pics
I dont have any references here but do at RR.