any help with set up

[Trevor January]

just wandering what people are runniung with a regular gasser for set up on servos and power systems any help would be awesome

[TVaillancourt]

FUT 9252 or JR 8717 servos all the way around with either the 611, 401 gyros or JR 770 combo's on the tail.

Use a good strong battery(don't ask me how I know) sub c type NicCd, Duralite LiIon system, or a generator, and good HD switches.

[lperagallo]

Trevor,

9252s all around except a 9402 on throttle with a Futaba 401 Gyro with a 9254. I have a 4500MAH NiMh battery with a generator from Rbort. I charge my battteries maybe twice a year.

Lou

[Trevor January]

well thats alot of help for sure cause on my gasser eb i run 9252 and 9255 and 401 combo

and a gen with two 3000 nicad with hd switches

[Trevor January]

i guess my intent is to make an absolute 3d machine, a first i want to do 8717 all around a 7703d with a 8900 and for the throttle another 8900. and for power i was thinking about fromeco heli regulator and 5200lion pack. let me know you guys think of that :confused:

[kelly steed]

I would you use fut 3001 all round,g23,950 main blades,and spend as much time as you can making it look nice.gyro don,t use go back to the old rev mix. you can do it trev.

[TVaillancourt]

I think your intent should be to become an absolute 3d pilot on another machine:tongue
unless you want to :bawlwhen you dork it in like me!

[Trevor January]

hey kelly i think you made some one mad hehehe and thats a sweet set up what's the oz tourqe on the 3001 like 5 oz

[Trevor January]

well to all to all i have decide that i am going to run the same set up as my eb it's seems be more then enuff and when i reach the point where it's not then ill do something about it, so 9252's all around and collective i am going to run a 9255. for batt's i have decided to run a single jr 3000 mah nicad a little heavy but i think it should even out and of course i am going to use a generator as well with some hd switches .

keep it simple and to the point, it seems to be a nice set up for my eb and the performance is great and i'm sure it will rock out some steady 3d moves when the time comes :thumbup: