Now this is what I call an ARF

[MonsterMaxx]

All I need to do is balance a set of main blades and set the final trims and it'll be RTF.

Servo wires & esc shortened (I couldn't bring myself to cut the gyro wires.) A few little mods here and there, but she's pretty well dialed now.

LMK if you like

http://www.unlimitedengineering.com/gallery/files/1/DSC03241Custom.JPG
http://www.unlimitedengineering.com/gallery/files/1/DSC03239Custom.JPG
http://www.unlimitedengineering.com/gallery/files/1/DSC03238Custom.JPG
http://www.unlimitedengineering.com/gallery/files/1/DSC03237Custom.JPG
http://www.unlimitedengineering.com/gallery/files/1/DSC03236Custom.JPG
http://www.unlimitedengineering.com/gallery/files/1/DSC03235Custom.JPG
http://www.unlimitedengineering.com/gallery/files/1/DSC03234Custom.JPG
http://www.unlimitedengineering.com/gallery/files/1/DSC03233Custom.JPG
http://www.unlimitedengineering.com/gallery/files/1/DSC03232Custom.JPG

[Jetleaf]

Lookin good. Have you flown it yet?

[northcarolinadan]

nice clean build..:thumbup:

[MonsterMaxx]

Nope, no flight yet. Had to let the loctite setup and still need to balance a set of main blades as well as final trims - I couldn't do that because the one blade grip was so bad there was no way I'd get good readings. I'll probably fly it today.

[stoatnchips]

MonsterMaxx, d oyou know which tail pitch slider that is? Is it the Gaui upgrade Ali one or something else?

[mjbrands]

My EP 200 SD came with the same metal pitch slider, so I would assume it is not an after-market upgrade. This one does have the newer output shaft for the T/R. Mine still had the older version, while the replacements I ordered are like on the ones on this heli.

[MonsterMaxx]

It came on the heli. Looks like the 'cnc' version shown on readyheli's site.

[stoatnchips]

thanks and very nice build BTW