gointoheli
07-12-2008, 07:51 PM
OK, I'm probably getting ready to sell everything. Just don't have the time anymore to justify letting it all sit around.
600E CF w/DS 821 cyclic and 401/9254 tail, AR 7000 RX and 6 amp BEC (Never Crashed)
450 SE v2 HS 65mg cyclic + 401/9650 tail, AR 6100 RX
3 Kong Power 6s1p 5000 mah
3 Kong Power 3s1p 2200 mah
Real Flight G3.5
e-station BC 8 charger w/ Radio Shack 25amp power supply
Tenergy 4s charger (The one that used to come with the Kong Power special, although I bought it seperately)
DX7 TX
2 extra canopies (practially new) for the 600
Tons of spare parts, tools etc... I have a complete crah kit for the 600 blades,belts,gears, shafts etc.. as well as many 400 parts.
The 600 has never been crashed. The 400 has been crashed 4 times and I haven't repaired it since the last one. It needs blades replaced, fly bar, boom and probably the main shaft although it seems fine. I have three spare booms 2 alu and one CF and spare set of woodies, so all it should need is a flybar and maybe the main shaft.
Just curious if anyone is interested in the whole package. I'll take photo's of everything.
I did a quick count and came up with about $4,000.00 and I know there's stuff I'm leaving out. I'm thinking about $2,500.00 for all of it?
600E CF w/DS 821 cyclic and 401/9254 tail, AR 7000 RX and 6 amp BEC (Never Crashed)
450 SE v2 HS 65mg cyclic + 401/9650 tail, AR 6100 RX
3 Kong Power 6s1p 5000 mah
3 Kong Power 3s1p 2200 mah
Real Flight G3.5
e-station BC 8 charger w/ Radio Shack 25amp power supply
Tenergy 4s charger (The one that used to come with the Kong Power special, although I bought it seperately)
DX7 TX
2 extra canopies (practially new) for the 600
Tons of spare parts, tools etc... I have a complete crah kit for the 600 blades,belts,gears, shafts etc.. as well as many 400 parts.
The 600 has never been crashed. The 400 has been crashed 4 times and I haven't repaired it since the last one. It needs blades replaced, fly bar, boom and probably the main shaft although it seems fine. I have three spare booms 2 alu and one CF and spare set of woodies, so all it should need is a flybar and maybe the main shaft.
Just curious if anyone is interested in the whole package. I'll take photo's of everything.
I did a quick count and came up with about $4,000.00 and I know there's stuff I'm leaving out. I'm thinking about $2,500.00 for all of it?