Help on Charging two packs Lipo

[kianhon]

I'm using Thunder power TP-610C and Turnigy Accucel 6 chargers.
Can I charge 2 packs with each charger with those connectors listed below?


Plug 2 Lipo with "1st Pic" and follow with plugging each lipo balancing tap to "2nd Pic" then plug to the charger's 6s balancer? I'll ignore the dean in "2nd Pic"?

If yes then how many "C" and lipo cell I should select in my charger?, I'm using only 11.1v 3s1p 2200mah 20c lipo.

[newhelliguy]

I believe you have a series cable (Pos to neg) so you would charge 22.2 volts (6s) and 2200 mah.
If it was a parallel connection (pos to pos and neg to neg )then you charge 11.1volts(3s) and 4400 mah.