Viperhead with COOL POWER 12,5%

[tempest]

Hey Guys

I have installed the Viperhead on my OS MAX SX H C. I can not use COOL POWER 30% because it is in Switzerland to expensive :arggg: ! On 30% i need 2 0.08 Shims. I will use 12.5% Nitro but do i still need the 2 Shims :?:

Thanks for Help :noteworthy

Andrew

[freddyferris]

Hi!

If you don't get any reply here,

Ask the Kreuzberger brothers (Voodoo @ rc-heli.de) they use vipeheads on their crappy's with 12,5%nitro..

Fred

[tempest]

Hi

Thanks for the Info.

Nearly every 1 in America uses 30%.

Andrew

[tempest]

Hi

I have sent them a Email. I don't think the email address is right.
(bad destination mailbox address)
(fehlerhafte Adresse der Ziel-Mailbox)
(adresse de boîte aux lettres de)

the address is wrong

Andrew

[freddyferris]

here is their HP, email is under the skids of their crappy ^^

http://www.raptor.at.tt/

Fred

[tempest]

Hey freddy

crappy :lol: lol I had a Raptor 30 V.2 with tuning and a Raptor 60 v.2 with tuning. They did never really work great. They are to expensive for a plastic model :? MINIATURE AIRCRAFT is for me the nr.1 in Model RC :thumbsup2: :thumbup:

Andrew

[freddyferris]

Raptors are OK! Dont know any better sim than a Crappy50 :P
And they are realy cheap!
Fred

[tempest]

Yeah

But with some tuning!!! :wow2: You pay to much and in Switzerland they rip u of with this tuning stuff :thumbdown:

[freddyferris]

dont need tuning :) just minimal.. but neverminde.. Mini air is the best :)

Fred

[tempest]

Kreuzberger brothers

they told me i should use for 12.5% Nitro COOL POWER 1. 0.04 shim and 1. 0.08 and over 20% Nitro the 2. 0.08 :D . The Viperhead is really hot! :clappp

Are there any other Tunings for your motor that work with the Viperhead :?:

Andrew

[freddyferris]

Omi Carb modification :)

Fred

[tempest]

Where can i get that :dontknow ? What is it for? Does it increase Power?
Andrew

[freddyferris]

It's a carburator mod made by the makers of the viperheads!
You get about +15% top range power :P,
But it's a litle expensive, tough you can use the carb for your next motors two :), you get a Cline regulator two!

check this thread: http://www.helifreak.com/about7247.html&highlight=omi

Fred

[tempest]

Thanks

I will wait for the price to climb down :wow2:

Andrew

[freddyferris]

it's worth it! Waiting for realy cold days (so i cant fly) and send my motor for the mod :P

Fred

[tempest]

mhh

Is there a site where i can order it :roll: ?

Andrew

[freddyferris]

http://www.oneals.com/

Fred

[freddyferris]

http://www.oneals.com/

Fred

[tempest]

thanks for your great Help :thumbup: !! So i need to contact them on email.

I will get 1 for sure :wink:

Andrew

[Mille aka Fredrik]

It's better to pic up the phone and call James. :D

[freddyferris]

yup Omi are old school guys ;) dont like replying by email :)
Phoned him 2-3month ago, realy great guy!!


Fred

[tempest]

So that means i need to phone him and send the Motor? I have got an OS MAX SX HC and a Viperhead, MP2. Do i need the PS for this setup?

Andrew

[freddyferris]

nop, you need a 60K carb, and a cspec... i think you only need to send the carb...

my mod will have to wait... just crashed the fury....i think my Tx is dead...

Fred

[DavidH]

All that James needs is the 60K carb and the back plate from the motor. If your comfortable drilling and tapping the back plate for a pressure fitting. Then you do not need to send the back plate.
There is two levels of carb modification.
Cline and modification for Cline $75
Bore the 60K carb to 10.8mm $125
For everything done to carb is $200 total.
James also has some 60K carbs in stock I believe also. He gets $100 plus for a stock 60K carb.

Yes calling James is the best thing to do. James is located in the Central Time Zone of the USA. So probably the best time to reach him is between 6PM and midnight European time zones.

David

[tempest]

ok thanks.

Andrew