logo 500

[q8hobbytime]

ok guys i have 0 backround in electric set up all my experiance was the trex500 which was plug and play
im thinking of getting the logo 500 cuz i found out its a 6 cell bird and i have a 6 cell charger, dont want to get a new one, anyways what do you guys recomend for a set up speed motor and the other missing parts in the kit
i have a set of Fut 9255 - GY 611

[q8hobbytime]

is it possible to have a full Scorpion setup speed + motor
it will make life easier as im going to order from amain

[beans07]

I asked the scorpion motor question a couple of weeks ago and was told they wouldn't be up to task.

I have since been talking to a mate who was using a 3026-1400kv in a trex600 with 11t pinion and 600mm V blades and getting better results than his 600xl motor. He did have trouble keeping his speedy cool though (Scorpion 120A).

I don't know a lot about electrics so you probably get better advice from some of the guru's on here.

[Dynamic]

scorpion does not as of yet have a high voltage BAD ASS motor. Their small stuff is great....they just don't have anything that will push a logo 5/600 to its limits.

Theres some hackers, actros, z-powers, and even some nues that will all do the job admirably.

Check some of the pinned threads at the top for some good power systems.

[Big Fil]

Check out the Hacker Electric Turbine motors. They will deliver the goods at a reasonable cost.

[Big Fil]

If you are really determined to get everything at Amain then check out the Hacker A40-10L. Good motor at a good price. Then get a Castle 85HV from their as well and you'll be set as far as power systems go.

http://www.amainhobbies.com/product_info.php/cPath/2_389_417/products_id/19297

There are quite a few on here running this motor and are quite happy with it. I'm running the 8L version which delivers a bit more umph but costs in battery consumption as well.

[aidz]

We have had quite a few customers using the HK3026 series in their Trex 600 and logo 500's with alot of success, however Scorpion are about to release a HK4025 motor series designed specifically for 600mm bladed or 50 sized machines! check out a video here http://www.trextuning.com/blog/?page_id=604

[dahld]

Like any other equipment question, you'll get a bunch of opinions. I've been flying lately in my Logo 500 the new Hacker A40-10L-8 Electric Turbine with the Jazz 55-10-32 ESC with a 15 tooth pinion, 550 blades, and the battery being the TP 6S 5000 V2 Extreme. The performance of this motor is as good as it gets for a Logo 500. Very powerful, yet runs cool. Other ESC's work as well, but the governor and performance of the Jazz is well proven and is hard to beat.

Now, stand-by for another opinion :).

Take care, Dave Dahl.

[th3tick]

Now, stand-by for another opinion :).

I rather like my Neu 1910/1Y/H and Jazz 80-6-18...